Maßgefertigte OSB-Platten für Spezialanwendungen

Title
Maßgefertigte OSB-Platten für Spezialanwendungen

Author
Costel Barbuta , Alain Cloutier , Pierre Blanchet , Vikram Yadama , Eini Lowell

European Journal of Wood and Wood Products 2011 v.69 no.4 pp. 511-519

Abstract

The purpose of this study was to develop speciality oriented strand board (OSB) with high stiffness for use in products such as engineered wood flooring (EWF). Three-layer oriented strand boards were manufactured from two feedstocks of strands: a mixture of 90% aspen (Populus tremuloides) and 10% of paper birch (Betula papyrifera), and 100% of small diameter ponderosa pine logs (Pinus ponderosa). The OSB panels were manufactured under a factorial design of three resin contents, two density profiles, and three weight ratios for the face and core layers. Tests to determine density, bending modulus of elasticity (MOE), internal bond (IB) and thickness swelling (TS) were performed according to ASTM standard D 1037-06a. The results showed that the higher values of bending MOE for panels made from aspen/birch mixture and ponderosa pine, 8190 and 9050 MPa, respectively, were obtained for the same combination of factors. Such high bending MOE values are very close to Baltic birch (Betula pendula) plywood, a product known for its high stiffness. The effect of resin content on IB is more pronounced for panels made from ponderosa pine than panels made from the aspen/birch mixture. Thickness swelling of panels made from ponderosa pine strands is higher than thickness swelling of panels made from a mixture of aspen and birch strands. The results indicate the potential to tailor an OSB for a specific application such as EWF.

For further details log on website :

http://pubag.nal.usda.gov/pubag/article.xhtml?id=407593&searchText=subject_term%3A%22wood+bonding%22&searchField=