Sunday, 30 October 2016

Multiresponse optimization based on statistical response surface methodology and desirability function for the production of particleboard

Published Date
Article (PDF Available)inComposites Part B Engineering 43(3):861–868 · April 2012with157 Reads
DOI: 10.1016/j.compositesb.2011.11.033
Author 
  • 25.29 · Khulna University
  • 6.78 · Khulna University

  • Abstract
    It is very difficult to determine the actual level of process parameters responsible for the quality production of particleboard due to the high degree of process variable interactions and lack of robust methodology for optimization. In this study, an attempt was made to optimize the process parameters of particleboard production by using multi-response optimization process. Plackett–Burman factorial design was first employed to eliminate some factors from selected seven important parameters: flake thickness, flake length, dried chips moisture content (MC%), amount of adhesive, pressing time, pressure, and press temperature. By using this screening procedure, three important factors: flake thickness, dried chips moisture content and press temperature were found to have significant effect on particleboard properties. Afterwards, Box–Behnken design was performed as response surface methodology (RSM) with desirability functions to attain the optimal flake thickness, MC% and press temperature that affect modulus of rapture (MOR) and modulus of elasticity (MOE) of particleboard production. The optimized parameters for maximum MOR and MOE determined were found to be: flake thickness, 0.15 mm; press temperature, 182 °C; and dried chip MC% 3.5. Finally, a confirmation study was execu

    For further details log on website :
    https://www.researchgate.net/publication/257545439_Multiresponse_optimization_based_on_statistical_response_surface_methodology_and_desirability_function_for_the_production_of_particleboard

    No comments:

    Post a Comment