aDepartment of Materials Science and Engineering, University of Maryland, College Park, MD 20742, USA
bMaterial Measurement Laboratory, National Institute of Standards and Technology (NIST), Gaithersburg, MD 20899, USA
Received 10 February 2016. Revised 9 May 2016. Accepted 12 May 2016. Available online 13 May 2016.
Highlights
•
Highly transparent, broadband wood composites are demonstrated for the first time.
•
A high optical transmittance (~90%) and a high haze (~80%) is achieved for effective light management.
•
An 18% efficiency improvement is achieved when applying the transparent wood in GaAs solar cells.
Abstract
Highly efficient broadband light management to enhance the light trapping inside active layer is critical for many energy conversion devices such as thin film solar cells and photoelectrochemical cells. In this work, we demonstrate highly transparent, mesoporous wood composite via fast extraction of lignin along naturally formed low tortuosity channels followed by fast filling of polymers. The transparent wood displays a high optical transmittance and at the same time a high haze in a broad wavelength range between 400 nm and 1100 nm. With such unique optical properties, the transparent wood composite with cellulose nanofibers can be utilized for a range of optoelectronics, especially for solar cells and wide-angle lighting where light management is crucial to enhance device operation efficiency. We demonstrate that the newly developed transparent wood composite can function as a broad range light management layer and substantially improve the overall energy conversion efficiency by as much as 18% when simply coated with a GaAs thin film solar cell. Our research on wood based light management material provides an attractive platform for future development embracing green, disposable optoelectronic devices with efficient light management.
Mingwei Zhu received his Ph.D. in Materials Science from Zhejiang University, China. In 2004, he joined the National Laboratory of Solid State Microstructures, Nanjing University as a post doctor. In 2007, he joined the Department of Materials Science and Engineering, Nanjing University. Currently, he is an associate professor at the College of Engineering and Applied Science, Nanjing University. From 2015 to 2016, he is a visiting scholar at Department of Materials Science and Engineering, University of Maryland. His research interests include environmental materials and microstructures, flexible electronics and optics, energy conversion materials and sensors.
Tian Li received the B.S. degree in Electrical Engineering from Huazhong University of Science and Technology, Hubei, China in 2010, and Ph.D. degree with Prof. Mario Dagenais in Electrical and Computer Engineering from University of Maryland, College Park, USA, in 2015. She is currently a Postdoctoral Research Scholar with Dr. Liangbing Hu in University of Maryland, College Park, MD, USA. Her research interests include low-dimensional electronic and optical devices, flexible electronics, energy generation and storage. She received the ECE Distinguished Dissertation Fellowship and Outstanding Graduate Assistant Award in 2015 for the recognition of her Ph.D. work.
Chelsea Davis received a B.S. in Textile Engineering from North Carolina State University in 2005. She obtained her M.S. and Ph.D. in Polymer Science and Engineering from the University of Massachusetts Amherst in 2007 and 2012, respectively focusing on the use of surface instabilities for adhesion control. From 2012 to 2013, Dr. Davis was a Michelin Postdoctoral Research Fellow at the ESPCI in Paris investigating polymer-polymer adhesion. She then completed an NRC Postdoctoral Fellowship at the National Institute of Standards and Technology researching polymer composites from 2013 to 2015. Dr. Davis is currently a Materials Research Engineer at NIST.
Yonggang Yao is currently a Ph.D. candidate in Department of Materials Science and Engineering at University of Maryland. His research interests are 1D fiber (cellulose nanofibers, carbon nanofibers and carbon nanotubes) and 2D sheet (reduced graphene oxide) based materials and structures with superior properties used for light manipulation, energy storage, electrochemical catalysis etc.
Jiaqi Dai received his B.S degree in Materials Science and Engineering from Harbin Institute of Technology, 2013, China. He is currently a Ph.D. candidate in materials engineering under the supervision of Prof. Liangbing Hu at University of Maryland, College Park, USA. His research interests mainly focus on nanotechnologies, advanced energy storage devices, and scientific visualizations.
Mr. Yanbin Wang received his Master degree from University of Maryland in 2016. He is currently a Ph.D. student in Department of Mechanical Engineering, University of Maryland. His research interests mainly focus on synthesis of 2D materials and energy conversion.
Feras AlQatari is currently a junior in department of materials science and engineering, University of Maryland (UMD) at College Park. His current research interests are photonic, energy and bio-inspired materials.
Jeffrey W. Gilman received his B.A. in chemistry from Ithaca College, and his Ph.D. in organic chemistry from the University of California, Irvine from Kenneth Shea. He joined NIST in 1994 as a research polymer chemist. He is currently the leader of the Composites Project at NIST. His recent work focuses on interface imaging using fluorescence methods and cellulose nanofiber composites. He has over 60 peer-reviewed publications, several patents and has authored several book chapters. Dr. Gilman has successfully formed four NIST-Industry research consortia, and has had a number of externally funded research programs during the 20 years at NIST. In 1999 he was awarded the Department of Commerce Bronze Medal, and in 2009 the Jacob Rabinow Award for his nanocomposites work.
Liangbing Hu received his B.S. in applied physics from the University of Science and Technology of China (USTC) in 2002. He did his Ph.D. in at UCLA, focusing on carbon nanotube based nanoelectronics. In 2006, he joined Unidym Inc as a co-founding scientist. At Unidym, Liangbing's role was the development of roll-to-roll printed carbon nanotube transparent electrodes and device integrations into touch screens, LCDs, flexible OLEDs and solar cells. He worked at Stanford University from 2009 to 2011, where he work on various energy devices based on nanomaterials and nanostructures. Currently, he is an associate professor at University of Maryland College Park.
No comments:
Post a Comment