Assessment of Safety Practices and Injuries Associated with Wood Processing in a Timber Company in Ghana

DOI: 10.4236/ojsst.2015.51002

Author(s)    

Stephen J. Mitchual, Mark Donkoh, Francis Bih

Affiliation(s)

Department of Construction and Wood Technology Education, University of Education, Winneba, Kumasi Campus, Kumasi, Ghana.

ABSTRACT

This paper reports the assessment of safety practices and injuries in a timber company in Ghana. A cross-sectional survey design was used for the study. Data were collected from 300 respondents at a sawmill in Ghana using a 5-point Likert-type scale questionnaire. Descriptive and inferential statistics were used for the data analyses. The result indicates that the mean rating of the respondents on their use of personal protective equipment ranged from 1.09 to 2.51. This implies that the workers of the sawmill rarely or never wear: gloves, overall, goggles, face shield, nose and mouth mask, earplugs or helmet during wood processing. Additionally, the mean ratings of the respondents regarding safety practices, machine and maintenance ranged from 2.42 to 4.03 with three out of the eight items having mean ratings higher than the theoretical mean of 3.0. The ratings of the respondents of the saw doctoring department on their practice of safety on machine and maintenance were significantly higher than those of the other departments. The result of the study further suggests that the workers of this sawmill do rarely report of: skin irritation/dermatitis, eye irritation, lack of appetite, arm/leg amputation, neck pains, hearing loss and poor eye sight problems. However, they usually report of headaches, nausea, respiratory problems, small cuts, back pains, and hip and leg pains. The outcome of this study therefore suggests that the management of the sawmill studied needs to do more to enforce practice of safety, especially the use of personal protective equipment, to reduce hazards and injuries associated with wood processing in the firm.

KEYWORDS

Safety Practices, Wood Processing, Wood Processing Injuries, Woodworkers

Cite this paper

Mitchual, S. , Donkoh, M. and Bih, F. (2015) Assessment of Safety Practices and Injuries Associated with Wood Processing in a Timber Company in Ghana. Open Journal of Safety Science and Technology, 5, 10-19. doi: 10.4236/ojsst.2015.51002.

References

[1]	Alli, B.O. (2008) Fundamental Principles of Occupational Health and Safety. 2nd Edition, International Labour Office, Geneva.
[2]	ILO (2013) Health and Safety at Work: Facts and Figures. http://www.ilo.org/global/about-the-ilo/media-centre/issue-briefs/WCMS_206117/lang--en/index.htm
[3]	Amponsah-Tawiah, K. and Dartey-Baah, K. (2011) Occupational Health and Safety: Key Issues and Concerns in Ghana. International Journal of Business and Social Science, 2, 119-126.
[4]	Acquah-Moses, E.K. (2002) Supply to the Local Market: From Policy to Chain Saw Lumber Production Production a Necessary Evil? Troperbs International-Ghana Workshop, Proceeding 2, Wood Industries Training Centre, Akyawkrom, Ejisu, Kumasi.
[5]	Boateng, M. and Nimako, M. (2000) A Situational Analysis of Occupational Health and Safety in Ghana. Unpublished Draft Report, Ministry of Employment and Social Welfare, Accra, 15-22.
[6]	Ministry of Health, Ghana Health Services (2002) A Handbook of Occupational Health. Occupational and Environmental Health Unit, Accra.
[7]	Adei, D. and Kunfaa E.Y. (2007) Occupational Health and Safety Policy in the Operation of the Wood Processing Industry in Kumasi, Ghana. Journal of Science and Technology, 27, 161-173.
[8]	Amponsah-Tawiah, K. (2013) Occupational Health and Safety and Sustainable Development in Ghana. International Journal of Business Administration, 4, 74-78. http://dx.doi.org/10.5430/ijba.v4n2p74
[9]	Neuman, W.L. (2000) Social Research Methods: Qualitative and Quantitative Approaches. Allynn & Bacon, Boston.
[10]	Lapidus, R.A. and Waite, M.J. (2001) Safety Management Perception Questionnaire. http://www.sipeonlinetraining.com/A-ZResources/Safety%20Management%20Perception%20Survey.pdf
[11]	Bright Ideas (2009) How Many Is Enough? The Quest for an Acceptable Survey Response Rate. https://kkbiersdorff.wordpress.com/2009/09/16/how-many-is-enough/
[12]	Osagbemi, G.K., La-Kadri, R.T. and Aderibigbe, S.A. (2010) Awareness of Occupational Hazards, Health Problems and Safety Measures among Sawmill Workers in North Central Nigeria. TAF Preventive Medicine Bulletin, 9, 325-328.
[13]	Ochire-Boadu, K., Kusi, E. and Lawer, E.A. (2014) Occupational Hazards and Safety Practices: A Concern among Small Scale Sawmilling Industries in Tamale Metropolis, Ghana. International Journal of Scientific & Technology Research, 10, 234-236.
[14]	Ahman, M., Holmstrom, M., Cynkier, I. and Soderman, E. (1996) Work Related Impairment of Nasal Function in Swedish Woodwork Teachers. Occupational and Environmental Medicine, 53, 112-117. http://dx.doi.org/10.1136/oem.53.2.112

For further details log on website :
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=54449