Activating relaxation-controlled diffusion mechanisms for tailored moisture resistance of gelatin-based bioadhesives for engineered wood products

Published Date
Received 20 November 2015, Revised 9 February 2016, Accepted 11 February 2016, Available online 27 February 2016

https://doi.org/10.1016/j.compositesa.2016.02.013

Author

• Kristen M. Hess, 
• Wil V. Srubar III^, 

• Department of Civil, Environmental, and Architectural Engineering, University of Colorado Boulder, ECOT 441 UCB 428, Boulder, CO 80309-0428, USA

Abstract

The feasibility of tailoring the moisture resistance of bioadhesives by activating relaxation-controlled diffusion mechanisms is demonstrated herein using gelatin, a hydrophilic biopolymer, as a model biobased resin for engineered wood products. The effect of gelatin-to-water concentration and tannin addition on the governing kinetics of water transport in gelatin-based bioadhesives was investigated in this work. Time-dependent flexural mechanical properties of laminated (a) gelatin and (b) gelatin–tannin wood veneer composites conditioned at both moderate and high humidity were characterized and compared to oriented strand board and plywood. Results indicate that increases in both gelatin and tannin content not only decrease rates of water uptake, volumetric swelling, and maximum moisture contents of gelatin-based resins, but also increasingly induce relaxation-controlled moisture diffusion behavior, which implies short-term moisture resistance and long-term moisture affinity. This behavior could be leveraged to address both in-service (i.e., strength, stiffness) and out-of-service (i.e., rapid biodegradation) requirements for engineered wood products.

For further details log on website :
http://www.sciencedirect.com/science/article/pii/S1359835X16000762