Variation in Wood Properties and Growth in Some Clones of Populus deltoides Bartr. ex Marsh

Published Date

DOI: 10.4236/ajps.2011.25076

Author(s)    

P. K. Pande

ABSTRACT

The present paper deals with within ramet radial, intra- and inter-clonal variations in the wood element’s dimensions and specific gravity of 10 clones of Populus deltoides Bartr. ex Marsh. The growth parameters namely ramet height and DBH were also considered for the study. Study material was collected from the 10 clones of Populus deltoids raised by WIMCO Plantations Ltd. at Rudrapur (Udhamsingh Nagar), India. Three clones were parent viz. G48, S7C8 (female) and G3 (male). Other clones represent hybrids of F1 generation. Inter- and intra-clonal variations were significant for all the wood traits except vessel element length for intra-clonal variations. Within ramet variations due to radial location were significant for fiber length and specific gravity with increasing trend from pith to periphery. Interaction of clone*replication was also significant for all the wood traits. Variations were significant for the DBH for the clones. Fiber length and specific gravity was significantly higher in female while wall thickness and vessel element length was in male clones (P < 0.01). Female parents (G48 and S7C8) showed higher fiber length and specific gravity than of the male parent (G3) while vessel element diameter and wall thickness was higher in male parent (G3). Fiber length was higher in offspring than the parent clones which may be the reflection of hybrid vigor for the trait. The clones of F1 offspring followed the similar patterns for the other wood traits as in the parent clones. Hierarchical cluster analysis showed that W/A 39 (male) and W 39 (female) clones of F1 generation were highly divergent than of the other clones.

KEYWORDS

FiberLength, Specific Gravity, Vessel Element Length Wall Thickness, Wood Variations

Cite this paper

P. Pande, "Variation in Wood Properties and Growth in Some Clones of Populus deltoides Bartr. ex Marsh," American Journal of Plant Sciences, Vol. 2 No. 5, 2011, pp. 644-649. doi: 10.4236/ajps.2011.25076.

References

[1]	H. E. Dadswell, “Tree Growth Characteristics and Their Influence on Wood Structure and Properties,” Proceedings of 7th British Commonwealth Forestry Conference, CSIRO, Canberra, 1957, p. 19.
[2]	J. Burley and R. R. Palmer, “Pulp and Wood Densitometric Properties of Pinus caribaea from Fiji,” C.F.I. Occasional Paper No. 66, 1979.
[3]	J. M. Dinwoodie, “Tracheid and Fiber-Length in Timber. A Review of Literature,” Forestry, Vol. 34, 1961, pp. 124-144.
[4]	B. S. S. Rao and R. V. Rao, “Variation in Length of Vertical Elements within One Tree of Betula pubercens Ehrh,” Journal of Indian Academy of Wood Science, Vol. 9, No. 2, 1978, pp. 105-110.
[5]	P. K. Pande, R. V. Rao, S. P. Agrawal and M. Singh, “Variation in the Dimensions of Trachied Elements of Pinus caribaea var. Bahamensis,” Journal of Tropical Forest Products, Vol. 1, No. 2, 1995, pp. 117-123.
[6]	J. E. Phelps, J. G. Isebrands and D. Jowett, “Raw Material Quality of Short Rotation Intensively Cultured Populus Clones. A Comparison of Stem and Branches Properties at Three Species,” IAWA Journal, Vol. 3, No. 3-4, 1982, pp. 193-200.
[7]	A. Kaubaa, A. E. Hernandez, M. Beaudoin and J. Poliquin, “Interclonal, Intra-Clonal and within Tree Variationin Fiber-Length of Popular Hybrid Clones,” Wood and Fiber Science, Vol. 30, No. 1, 1998, pp. 140-147.
[8]	L. Chauhan, R. D. Raturi and S. Gupta, “Studies on anatomical variations in different clones of Populus deltoides,” Indian Forester, Vol. 125, 1999, pp. 526-532.
[9]	L. Chauhan, S. Gupta, R. C. Madhwal, R. Pandey and M. Pal, “Interclonal, Intraclonal and within Tree Variation in Wood Parameters of Different Clones of Populus deltoides,” Indian Forester, Vol. 127, No. 7, 2001, pp. 777- 784.
[10]	P. Gautam, “Multilocational Trials of Micro-Propa- Gated L-34 Clone of Populus deltoides Bartr. ex Marsh: Analysis of Wood Anatomical Properties and Growth,” Ph.D Thesis, Forest Research Institute University, Dehradun, 2010.
[11]	P. K. Pande and R. C. Dhiman, “Variations in Wood Tratis in Micro and Macro Propagated Plantation Woods of Populus deltoides Bartr. ex Marsh,” Advances in Biosciences and Biotechnology, Vol. 1, 2010, pp. 263-275. doi:10.4236/abb.2010.14035
[12]	S. K. Purkayastha, S. P. Agrawal, P. Farooqui, R. D. Tandon, L. Chauhan and N. Misra, “Evaluation of Wood Quality of Eucalyptus Plantations in Various States,” Final Technical Report, PL 480 Project no Inn FS-66, 1979-1980, p. 85.
[13]	IAWA, “Committee List of Microscopic Features for Hardwood Identification,” IAWA Bulletin, Vol. 10, 1989, pp. 201-332.
[14]	T. Okuyama, H. Yamamoto, I. Wahyudi, Y. S. Hadi and K. M. Bhat, “Some Wood Quality Issues in Planted Teak,” International Conference on Quality Timber Products of Teak from Sustainable Forest Management, KFRI, Kerala, 2-5 December 2003, p. 21.
[15]	R. V. Rao, S. Shashikala, P. Sreevani, V. Kothiyal, C. R. Sharma and P. Lal, “Within Tree Variation in Anatomical Properties of Some Clones of Eucalyptus tereticornis Sm,” Wood Science Technology, Vol. 36, No. 3, 2002, pp. 271-285. doi:10.1007/s00226-002-0139-3
[16]	P. K. Pande, “Assessment of the Performance of Different Clones of Dalbergia Sissoo and Eucalyptus tereticornis on the Basis of Wood Quality under Different Farm Forestry Programs,” Final Technical Report, ICFRE, Dehradun, 2005.
[17]	P. K. Pande and M. Singh, “Intraclonal, Inter-Clonal and Single Tree Variations of Wood Anatomical Properties and Specific Gravity of Clonal Ramets of Dalbergia sissoo Roxb,” Wood Science Technology, Vol. 39, No. 5, 2005, pp. 351-366. doi:10.1007/s00226-004-0273-1
[18]	P. K. Pande, “Assessment of the Wood Quality Parameter in Seed Raised Plantations of Different Diameter Classes of Dalbergia sissoo Roxb,” FRI-299/Bot-45, FTR submitted to ICFRE, 2008, pp 120-126.
[19]	P. K. Pande, S. Naithani, V. Kothiyal, Mohanta, S. S., N. Juyal and R. Rawat, “Intra and Inter Tree Variations in Physico-Chemical and Wood Anatomical Properties of Leucaena leucocephala (Lam.) De Wit,” Indian Forester, Vol. 134, No. 5, 2008, pp. 622-632.
[20]	W. K. Murphey, T. W. Bowersox and P. R. Blankenhorn, “Selected Wood Properties of Young Populus Hybrid,” Wood Science, Vol. 11, No. 4, 1979, pp. 236-267.
[21]	R. V. Rao and S. Shashikala, “Assessment of Growth Rate, Basic Density and Heart Wood Content in Selected Teak Clones of CSO, Thithimathi in Karnataka State, India,” International Conference on Quality Timber Products of Teak from Sustainable Forest Management, KFRI, Kerala, 2-5 December 2003, p. 57.
[22]	G. M. Bhatt, “Comparison of Various Methods of Selecting Parents for Hybridization in Common Bread Wheat (Triticum aestivum),” Australian Journal Agriculture Research, Vol. 24, No. 4, 1973, pp. 457-484. doi:10.1071/AR9730457
[23]	E. Camphinhos and Y. K. Ikemori, “Mass Production of Eucalyptus Species by Rooting Cuttings,” Proceedings IUFRO symposium Genetic Improvement and Production of Fast Growing Trees, Sao Pede Sao Paulo, 1980, p. 16.
[24]	M. R. Ahuja and W. J. Libby, “Clonal Forestry I: Genetics and Biotechnology,” Springer-Verlag, New York, 1993 a, p. 227.
[25]	M. R. Ahuja and W. J. Libby, “Clonal Forestry II: Genetics and Biotechnology,” Springer-Verlag, New York, 1993 b, p. 240.

:
For further details log on website :
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=8735