Publication History
- Received:
- Accepted:
- Published Online:
Author
1Faculty of Forestry and Wood Technology, Department of Wood Science, Mendel University in Brno, Brno, Czech Republic
Abstract
The goal of the study is to investigate the non-standard deformation behaviour of wood loaded by compression parallel to the grain. This is represented as a negative increment of strain in the range of plastic deformations when the load continues to increase. The objectives of this study are to point out this problem and to provide its description based on the deformation fields that have been analysed using three approaches: a) full-field optical technique based on digital image correlation (DIC); b) “clip on” extensometer and its virtual analogy, and c) crosshead displacement method. Further, the negative strain phenomenon was studied depending on the sample length. The samples were made from the European beech (Fagus sylvatica L.) and Norway spruce (Picea abies L. Karst.). Based on the strain analysis, it can be concluded that the deformation field consists of three sub-regions exhibiting different stiffness values (three-spring model). The failure of less stiff zones near the compression plates during the “non-standard” compression behaviour causes almost zero compression deformation of the stiffer middle zone or even leads to its expansion. The three-zone heterogeneity of deformation field induces a deviation of the displacement and strain measured by the proposed approaches. This phenomenon substantially influences the resulting longitudinal Young’s modulus and, therefore, should be of concern when measuring wood in such mode.
For further details log on website :
No comments:
Post a Comment