Wednesday, 14 September 2016

Thermo-oxidative decomposition and combustion behavior of Scots pine (Pinus sylvestris L.) sapwood modified with phenol- and melamine-formaldehyde resins

Published Date
Original
DOI: 10.1007/s00226-016-0857-6


Cite this article as: 
Xie, Y., Xu, J., Militz, H. et al. Wood Sci Technol (2016). doi:10.1007/s00226-016-0857-6


Author

  • Yanjun Xie
  • Jiejie Xu
  • Holger Militz
  • Fengqiang Wang
  • Qingwen Wang
  • Carsten Mai

  • Abstract

    Modification of wood with phenol-formaldehyde (PF) and melamine-formaldehyde (MF) resins is known as an efficient strategy to improve wood’s dimensional stability, mechanical strength, and durability. This study systematically examined the effects of these types of modifications on the thermo-oxidative decomposition and combustion behavior of Scots pine (Pinus sylvestris L.) sapwood treated to weight percent gains ranging from 10 to 55 %. Thermo-gravimetry results showed that treatment with PF and MF reduced the decomposition rate, thereby thermally stabilizing the wood. Bench-scale cone calorimetry results indicated that the treated wood exhibited longer ignition times and yielded more char than the untreated control. Treatment with PF did not substantially change the heat release of wood, but led to a considerable increase in CO and smoke production. New compounds in the smoke from the treated wood were identified as phenols and its derivatives resulted from incorporation of PF resin as evidenced by pyrolysis/gas chromatography/mass spectrometry of the volatile organic compounds. Treatment of the wood with MF resulted in greater heat release due to complete combustion; however, smoke production was significantly suppressed. These findings demonstrate that both treatments cause different fire risk patterns: smoke issues for the PF-treated wood and heat hazard for the MF-treated wood.

    References
    1. Alajbeg A (1986) Products of non-flaming combustion of phenol-formaldehyde resin foam. J Anal Appl Pyrol 9:255–263CrossRef
    2. Anderson IH, Cawley M, Steedman W (1971) Melamine-formaldehyde resins II. Thermal degradation of model compounds and resins. Br Polym J 3:86–92CrossRef
    3. Batiot B, Luche J, Rogaume T (2014) Thermal and chemical analysis of flammability and combustibility of fir wood in cone calorimeter coupled to FTIR apparatus. Fire Mater 38:418–431CrossRef
    4. Biziks V, Bicke S, Militz H (2015) Penetration of phenol formaldehyde (PF) resin into beech wood studied by light microscopy. In: Proceedings of the international research group on wood protection, Document No. IRG/WP 15-20558
    5. Costa L, Camino G, Luda di Cortemiglia MP (1990) Mechanism of thermal degradation of fire-retardant melamine salts. In: Nelson GL (ed) Fire and polymers, vol 425. ACS symposium series, vol 425. American Chemical Society, Washington, pp 211–238
    6. Daniels CA (1989) Polymers: structure and properties. CRC Press, Lancaster
    7. Deka M, Saikia CN (2000) Chemical modification of wood with thermosetting resin: effect on dimensional stability and strength property. Bioresour Technol 73:179–181CrossRef
    8. Deka M, Saikia CN, Baruah KK (2002) Studies on thermal degradation and termite resistant properties of chemically modified wood. Bioresour Technol 84:151–157CrossRefPubMed
    9. Friedel B, Greulich-Weber S (2006) Preparation of monodisperse, submicrometer carbon spheres by pyrolysis of melamine-formaldehyde resin. Small 2:859–863CrossRefPubMed
    10. Furuno T, Imamura Y, Kajita H (2004) The modification of wood by treatment with low molecular weight phenol-formaldehyde resin: a properties enhancement with neutralized phenolic-resin and resin penetration into wood cell walls. Wood Sci Technol 37:349–361CrossRef
    11. Gao M, Li S, Sun C (2004) Thermal degradation of wood in air and nitrogen treated with basic nitrogen compounds and phosphoric acid. Combust Sci Technol 176:2057–2070CrossRef
    12. Girods P, Dufour A, Rogaume Y, Rogaume C, Zoulalian A (2008) Thermal removal of nitrogen species from wood waste containing urea formaldehyde and melamine formaldehyde resins. J Hazard Mater 159:210–221CrossRefPubMed
    13. Hagstrand P-O (1999) Mechanical analysis of melamine-formaldehyde composites. Ph.D. thesis, Chalmers University of Technology
    14. Harada T (2001) Time to ignition, heat release rate and fire endurance time of wood in cone calorimeter test. Fire Mater 25:161–167CrossRef
    15. Hill CAS (2006) Wood modification: chemical, thermal and other processes. Wiley, ChichesterCrossRef
    16. Hirata T, Kawamoto S, Nishimoto T (1991) Thermogravimetry of wood treated with water-insoluble retardants and a proposal for development of fire-retardant wood materials. Fire Mater 15:27–36CrossRef
    17. Inoue M, Ogata S, Nishikawa M, Otsuka Y, Kawai S, Norimoto M (1993) Dimensional stability, mechanical properties, and color changes of a low molecular weight melamine-formaldehyde resin impregnated wood. Mokuzai Gakkaishi 39:181–189
    18. ISO 5660-1 (2002) Reaction-to-fire tests—heat release, smoke production and mass loss rate—Part 1: heat release rate (cone calorimeter method). ISO International Organization for Standardization
    19. Kielmann BC, Militz H, Mai C, Adamopoulos S (2013) Strength changes in ash, beech and maple wood modified with a N-methylol melamine compound and a metal-complex dye. Wood Res 58:343–350
    20. Kielmann BC, Adamopoulos S, Militz H, Koch G, Mai C (2014) Modification of three hardwoods with an N-methylol melamine compound and a metal-complex dye. Wood Sci Technol 48:123–136CrossRef
    21. Klüppel A, Mai C (2013) The influence of curing conditions on the chemical distribution in wood modified with thermosetting resins. Wood Sci Technol 47:643–658CrossRef
    22. Knop A, Pilato LA (1985) Phenolic resins: chemistry, applications and performance: future directions. Springer, Berlin
    23. Levchik SV, Balabanovich AI, Levchik GF, Costa L (1997) Effect of melamine and its salts on combustion and thermal decomposition of polyamide 6. Fire Mater 21:75–83CrossRef
    24. Lou R, Wu S (2011) Products properties from fast pyrolysis of enzymatic/mild acidolysis lignin. Appl Energy 88:316–322CrossRef
    25. Lytle CA, Bertsch W, McKinley M (1998) Determination of novolac resin thermal decomposition products by pyrolysis-gas charomatography-mass spectrometry. J Anal Appl Pyrol 45:121–131CrossRef
    26. Marney DCO, Russell LJ, Mann R (2008) Fire performance of wood (Pinus radiata) treated with fire retardants and a wood preservative. Fire Mater 32:357–370CrossRef
    27. Miroy F, Eymard P, Pizzi A (1995) Wood hardening by methoxymethyl melamine. Holz Roh- Werkst 53:276CrossRef
    28. Mohebby B, Talaii A, Najafi SK (2007) Influence of acetylation on fire resistance of beech plywood. Mater Lett 61:359–362CrossRef
    29. Nagaoka T, Kodaira A, Uehara S (1998) Relationship between density and the ignitability and combustibility of wood. In: Cox G, Langford B (eds) Proceedings of the third asia-oceania symposium on fire science and technolgy, Singapore, June 10–12 1998, pp 197–208
    30. Ohmae K, Minato K, Norimoto M (2002) The analysis of dimensional changes due to chemical treatments and water soaking for Hinoki (Chamaecyparis obtusa) wood. Holzforschung 56:98–102CrossRef
    31. Ozaki JI, Ohizumi W, Oya A (2000) A TG-MS study of poly(vinyl butyral)/phenol-formaldehyde resin blend fiber. Carbon 38:1515–1519CrossRef
    32. Patwardhan PR, Satrio JA, Brown RC, Shanks BH (2009) Product distribution from fast pyrolysis of glucose-based carbohydrates. J Anal Appl Pyrol 86:323–330CrossRef
    33. Pittman JCU, Kim MG, Nicholas DD, Wang L, Ahmed Kabir FR, Schultz TP, Ingram JLL (1994) Wood enhancement treatments I. Impregnation of southern yellow pine with melamine-formaldehyde and melamine-ammeline-formaldehyde resins. J Wood Chem Technol 14:577–603CrossRef
    34. Ponder GR, Richards GN (1991) Thermal synthesis and pyrolysis of a xylan. Carbohydr Res 218:143–155CrossRef
    35. Pries M, Mai C (2013) Fire resistance of wood treated with a cationic silica sol. Eur J Wood Wood Prod 71:237–244CrossRef
    36. Saka S, Sasaki M, Tanahashi M (1992) Wood-inorganic composites prepared by sol-gel processing I. Wood-inorganic composites with porous structure. Mokuzai Gakkaishi 38:1043–1049
    37. Schartel B, Hull TR (2007) Development of fire-retarded materials—Interpretation of cone calorimeter data. Fire Mater 31:327–354CrossRef
    38. Shultz T, Goodell B, Nicholas DD (eds) (2014) Deterioration and protection of sustainable biomaterials, vol 1158. American Chemistry Society Symposium Series
    39. Sobera M, Hetper J (2003) Pyrolysis–gas chromatography–mass spectrometry of cured phenolic resins. J Chromatogr A 993:131–135CrossRefPubMed
    40. Spearpoint MJ, Quintiere JG (2000) Predicting the burning of wood using an integral model. Combust Flame 123:308–324CrossRef
    41. Stamm AJ, Seborg RM (1936) Minimizing wood shrinkage and swelling. Treating with synthetic resin-forming materials. Ind Eng Chem 28:1164–1169CrossRef
    42. Wang J, Zhang MX, Chen MQ, Min FF, Zhang SP, Ren ZW, Yan YJ (2006) Catalytic effects of six inorganic compounds on pyrolysis of three kinds of biomass. Thermochim Acta 444:110–114CrossRef
    43. Wang J, Jiang H, Jiang N (2009) Study on the pyrolysis of phenol-formaldehyde (PF) resin and modified PF resin. Thermochim Acta 496:136–142CrossRef
    44. Wang D, Zhang X, Luo S, Li S (2012) Preparation and property analysis of melamine formaldehyde foam. Adv Mater Phys Chem 2:63–67CrossRef
    45. Xie Y, Krause A, Mai C, Militz H, Richter K, Urban K, Evans PD (2005) Weathering of wood modified with the N-methylol compound 1,3-dimethylol-4,5-dihydroxyethyleneurea. Polym Degrad Stab 89:189–199CrossRef
    46. Xie Y, Fu Q, Wang Q, Xiao Z, Militz H (2013) Effects of chemical modification on the mechanical properties of wood. Eur J Wood Wood Prod 71:401–416CrossRef
    47. Xie Y, Liu N, Wang Q, Xiao Z, Wang F, Zhang Y, Militz H (2014) Combustion behavior of oak wood (Quercus mongolica L.) modified by 1,3-dimethylol-4,5-dihydroxyethyleneurea (DMDHEU). Holzforschung 68:881–887CrossRef

    For further details log on website :
    http://link.springer.com/article/10.1007/s00226-016-0857-6

    No comments:

    Post a Comment