Blog List

Tuesday, 16 May 2017

Company Recycles Coffee Grounds into Durable Coffee Cups

Author
By Spooky

German company Kaffeeform combines dried coffee grounds and biopolymer to create stylish-looking coffee cups and saucers that are not only durable and dishwasher-safe, but even smell a bit like coffee.

For every cup of coffee you brew, about two tablespoons of grounds wind up in the trash. That doesn’t seem like a lot, but just think about the millions of coffees consumed around the world every single day, and you’ll start to see the problem. Sure, some of those coffee grounds are recycled as fertilizer or beauty products like face masks, but most of it ends up at landfills. It was while contemplating this issue that German designer product designer Julian Lechner came up with a radical new and sustainable way of recycling coffee grounds – turning them into tableware.

Lechner first came up with the idea of using coffee grounds to create eco-friendly crockery while attending university in the Italian city of Bolzano. “We were always drinking coffee at university,” he remembers. “Before classes, after classes, meeting friends, hanging out at espresso bars—all the time. And that’s how I started to wonder, What happens to all that coffee? It was all just getting thrown away.” He began consulting with his professors about ways of using coffee grounds to create a solid material, but it took him years to actually come up with a viable solution.

Kaffeeform-recycled-coffee-grounds

“We tried binding with a lot of different things,” Julian Lechner told VICE Munchies. “We even tried sugar. That was close, but basically it was a candy cup. It just kept dissolving after being used three times.” The whole point was to make the material durable, so it was back to the drawing board for him and his partners at a German research institute. Finally, after many failed experiments, long nights and liters of coffee, they came up with a mix of coffee grounds wood grains and a biopolymer of cellulose, lignin, and natural resins that seemed to behave the way Julian had envisioned it when he first embarked on his quest.

Kaffeeform-recycled-coffee-grounds3

“The moment of knowing the cup would actually stand was super-exciting,” he recalls. “After such a long time, you have to really believe in an idea and that it can eventually work. It was overwhelming to drink that first coffee out of the cup. It proved to be totally worth the wait.” And the fact that his creation has proven commercially successful is just the icing on the cake. Kaffeeform coffee cups and saucers are now present in ten shops across Europe, and the company can hardly keep up with demand, regularly selling out of its stock online. And they’ve only been in business for a year.

Kaffeeform-recycled-coffee-grounds2

“It basically all happened through word of mouth,” Lechner says about the success of his company. “It’s amazing to think of some of the places where orders have come from. A lot of individuals, but also a café in Saudi Arabia, Ritz Carlton Toronto, and the Nobel Peace Prize in Oslo to sell in their museum [gift shop].”

Kaffeeform-recycled-coffee-grounds6

To make the recycled crockery, Kaffeeform picks up coffee grounds from three roasters in Berlin and delivers them to the headquarters of Mosaik, an organization that pairs small businesses with physically and mentally disabled workers. Here the grounds are dried in a special oven, compressed and packed into 400-kilogram bags. Then, they are shipped to a factory in the German state of Baden-Württemburg, where they are mixed with the wood grains, biopolymers and natural fibers. The new material then travels to Cologne for melting and compression into molds. About six servings of grounds are used for every cup. Finally, the recycled cups and saucers travel back to Mosaick, where workers pack them in reused coffee bags and ship them to customers.

Kaffeeform-recycled-coffee-grounds5

Julian Lechner says working with disabled people through Mosaik is a wonderful experience for both parties, and also gives customers an extra reason to feel good about buying their product. “Mosaik told me they love the product because it’s innovative, but also because it’s a nice job for the workers,” Lechner told Munchies. “[When drying grounds] the whole workshop smells like coffee, and they really like it.”

Kaffeeform-recycled-coffee-grounds7

Kaffeeform will soon launch a larger line of coffee grounds cups for cappuccino, and is also working on a travel mug. But those are just short-term plans, as Lechner hopes to one day use recycled coffee grounds to create all sort of useful stuff. “What’s next? I’d love to see if we could one day create sheets,” he says. “Perhaps they could later be used for furniture in cafés and restaurants.”



Photos: Kaffeeform
For further information log on website :
http://www.odditycentral.com/news/company-recycles-coffee-grounds-into-durable-coffee-cups.html

Macromolecular Nanotechnology : Cellulose nano-biocomposites from high oleic sunflower oil-derived thermosets

Author
  • a Departament de Química Analítica i Química Orgànica, Universitat Rovira i Virgili, C/ Marcel.lí Domingo 1, 43007 Tarragona, Spain
  • b Materials Engineering Center, UdR INSTM, Strada di Pentima 4, 05100 Terni, Italy

Highlights

•
Liquid easy to handle prepolymer/nanocellulose dispersions were formulated.
•
Both monomers and nanofillers are of renewable origin.
•
Films are cured under mild conditions.
•
Good CNC dispersions in the polymer matrix were achieved.
•
Properties improvement is notable in the nanocomposite with 5% CNC.

Abstract

Thiol-Michael addition of pentaerythritol tetrakis(3-mercaptopropionate) (PE3MP) to a high oleic sunflower oil derivative containing enone groups (ETG), has been used to prepare vegetable oil derived renewable thermosets in an efficient way and under mild conditions. The same formulation has been used to prepare nano-biocomposites by incorporating into the polymerization mixture, 1 wt%, 5 wt% and 10 wt% of cellulose nanocrystals (CNC) modified with Beycostat A B09® as surfactant. The chosen methodology allows a good dispersion of the nano filler in a low polarity reactive media which still is a challenging approach. The morphological, thermal and mechanical properties of the different nano-biocomposites were evaluated and compared with the pristine thermoset. Morphological analysis shows that good dispersion of the nanofillers is achieved in all formulations. Mechanical properties show an improvement of the Young Modulus for all nanofiller contents, showing a maximum at 5 wt% loading (32 and 78 MPa for the pristine and 5% CNC nano-composite respectively) that has been related with the reinforcement effect of the modified CNC. CNC dispersion also affects positively the surface properties, thus reducing drastically the contact angle values (78.0–16.0° for the pristine and 10% CNC nano-composite respectively). Finally, protein adsorption was measured in order to evaluate potential application of these materials as biosensors and cell growing supports.

Graphical abstract

Image for unlabelled figure
For further details log on website :
http://www.sciencedirect.com/science/article/pii/S0014305716302804

Fluorinated Polymers Based On Pyrazole Groups For Fuel Cell Membranes

Author
  • a Laboratoire de Chimie Organique, Macromoléculaire et Produits Naturels – URAC 25, Faculté des Sciences, BP : 717, Bd Mohamed VI, 60 000 Oujda, Morocco
  • b Ingénierie et Architectures Macromoléculaires, Institut Charles Gerhardt UMR – CNRS 5253, 8, Rue de l’école Normale, ENSCM, 34296 Montpellier, France

Highlights

•
Fluorinated copolymers bearing pyrazole group as precursor of proton-conducting membranes.
•
1-Benzyl-5-methyl-3-hydroxymethyl-pyrazole was synthesized and then grafted onto poly(CTFE-alt-IEVE) copolymer.
•
Deprotection of the benzyl group produced poly(CTFE-alt-IEVE)-dep-pyrazoley%copolymers.
•
NMR spectroscopy enabled to monitor all reaction steps.
•
Copolymers processed into membranes with proton conductivity of 4 × 10−5 mS cm−1 at 180 °C.

Abstract

The synthesis and characterization of two fluorinated copolymers bearing pyrazole group as precursor of proton-conducting membranes in polymer electrolyte fuel cells are described. 1-Benzyl-5-methyl-3-hydroxymethyl-pyrazole was first synthesized in a two step-reaction. It was then grafted onto poly(chlorotrifluoroethylene -alt-2-iodoethyl vinyl ether) copolymer (poly(CTFE-alt-IEVE)). The degree of grafting was controlled by the reaction time, and reached 30 and 55% after 24 and 48 h, respectively. Deprotection of the benzyl group produced poly(CTFE-alt-IEVE)-dep-pyrazoley% copolymers. NMR spectroscopy enabled to monitor all reaction steps and ensured the purity of these functional fluorinated copolymers. The poly(CTFE-alt-IEVE)-dep-pyrazoley% copolymers were thermally stable (up to 200 °C under air) and showed a maximum proton conductivity of 4 × 10−5 mS cm−1 at 180 °C under anhydrous conditions. From cyclic voltammetry (CV), these copolymers displayed an electrochemical stability domain extended over 2.0 V.

Graphical abstract

Image for unlabelled figure

Keywords

  • Alternating copolymers; 
  • Chlorotrifluoroethylene; 
  • Conductivity; 
  • Fluoropolymers; 
  • Nuclear magnetic resonance; 
  • Proton exchange membrane fuel cell; 
  • Pyrazole
For further details log on website :
http://www.sciencedirect.com/science/article/pii/S0014305716302774

Advanced biocomposite from highly functional methacrylated epoxidized sucrose soyate (MAESS) resin derived from vegetable oil and fiberglass fabric for composite applications

Author
  • a Mechanical Engineering Department, North Dakota State University, 111 Dolve Hall, NDSU Dept 2490, Fargo, ND 58108, USA
  • b Department of Coatings and Polymeric Materials, North Dakota State University, Fargo, ND 58108, USA

Highlights

•
Highly-functional bio-based methacrylated epoxidized sucrose soyate (MAESS) were developed.
•
MAESS was used as a matrix for compression molding E-glass composites.
•
High bio-based content composites were found to outperform petrochemical based counterparts.
•
SEM of fractured composites revealed improved wetting of fibers enhancing interfacial bonding.

Abstract

For the two last decades, the depletion of petrochemical resources and the increased global environmental awareness have led to a growing interest in polymers derived from renewable resources. Among the possible technical approaches, using plant-based polymers seems to be the most promising solutions. However, most of the bio-based polymers yield low glass transition temperature (Tg) and low mechanical properties such as modulus and hardness. In this paper, the development of a new generation of highly functional polyester-like polymers for using in composite applications was investigated. These materials were synthesized by mixing methacrylated epoxidized sucrose soyate (MAESS) with styrene as a reactive diluent and using a mixture of Luperox P and Trigonox 239A as a high temperature and room temperature initiators, respectively. E-glass fibers were also used as reinforcements. The prepared bio-based composites were characterized by tensile, flexural, and impact strength testing. Scanning electron microscopy and interlaminar shear strength (ILSS) were examined to study the fiber–matrix interface behavior. To highlight the performance of bio-based MAESS resin in composites, the results of E-glass/MAESS composite were compared against E-glass/VE as a control. The tensile strength and modules of MAESS and VE resins reinforced with E-glass fibers are 532 MPa, 36.79 GPa and 536 MPa, 36.40 GPa, respectively. The impact strength of the composites with MAESS resin reinforced with E-glass fibers was 237 kJ/m2, whereas that of the vinyl ester resin reinforced with same E-glass fiber was 191 kJ/m2. The composites using MAESS were hard and ductile with high modulus and exhibit excellent interface and mechanical properties due to high functionality, rigid and compact chemical structures of MAESS oligomers in the thermoset resin. These bio-based composites have potential uses in variety of composite applications both at low and high temperatures.

Graphical abstract

Image for unlabelled figure

Keywords

  • E-glass fiber; 
  • Bio-based composite; 
  • Compression molding; 
  • Mechanical properties
For further details log on website :
http://www.sciencedirect.com/science/article/pii/S0014305716302579

Hemp Fiber Biocomposites And Fiberglass Composites For Structural Application : A Comparison


Author: MAINO, ALESSANDRA
Supervisor: DI LANDRO, LUCA ANGELO
Scientific Disciplinary Sector: ING-IND/22 SCIENZA E TECNOLOGIA DEI MATERIALI
Date: 28-Jul-2016
Academic year: 2015/2016
Title: Hemp fiber biocomposites and fiberglass composites for structural application : a comparison
English abstract: High interest towards biocomposite materials is especially due to their design flexibility and sustainable nature. They are nowadays largely employed in many fields of applications such as automotive, buildings, naval, electronic and even aeronautic, especially in substitution of glass fiber-epoxy composites, thanks to their lower costs and lower environmental impact. Although, due mainly to several problems related to natural fibers, which constitute the biocomposites reinforcement, they remain confined to non-structural applications. Based on the similar specific properties of glass fibers and hemp fibers, the aim of this thesis is to compare the mechanical characteristics of a bio composite spar, for small aeronautic structure, to those of a fiberglass-epoxy composite one, and to analyze the several issues related to the manufacture. After a brief study of the two types of woven fabric and of the two types of resins four spars were manufactured by hand lamination and vacuum bag curing, followed by suitable post-curing cycles. Static torsion and bending tests and a bending failure test were carried out. At last, an analysis by means of scanning electron microscopy (SEM) of the composite spars was performed in order to observe the fractured surfaces and fibers, the matrix-fiber adhesion and possible presence of voids in the matrices.
Italian keywords: biocompositi; fibre naturali; canapa; matrice epossidica; compositi; fibre di vetro; flessione; torsione; cedimento
English keywords: biocomposites; natural fibers; hemp; epoxy matrix; composites; fiberglass; bending; failure
Language: eng
Appears in Collections:POLITesi >Tesi Specialistiche/Magistrali

For further details log on website :
https://www.politesi.polimi.it/handle/10589/123861

APPLICATION OF BIOTECHNOLOGY IN AGRICULTURE AND MEDICINE: UNITED STATES VERSUS EUROPE

Author
Arbindra Rimal, Wanki Moon and Siva K. Balasubramanian

Abstract: Discrepancies in the attitude between US and UK consumers toward application of biotechnology in crop production and medicine were examined using data from mail and online surveys. Results showed that more than 31% (46%) of US (UK) respondents were opposed to biotech foods while only 16% (18%) opposed biotech medicine, respectively. Perceived risks and benefits of agro-biotechnology and medical biotechnology were significant in determining overall attitude toward application of biotechnology in agriculture and medicine i.e., perceived risks (benefits) caused consumers to oppose (support) application of biotechnology in food production and medicine.
Downloads: (external link)
http://purl.umn.edu/20005 (application/pdf)
Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.
Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text
Access Statistics for this paper
More papers in 2004 Annual meeting, August 1-4, Denver, CO from American Agricultural Economics Association (New Name 2008: Agricultural and Applied Economics Association) Contact information at EDIRC.
Series data maintained by AgEcon Search (aesearch@umn.edu).

For further details log on website :
http://econpapers.repec.org/paper/agsaaea04/20005.htm

Advantages and Disadvantages of Fasting for Runners

Author BY   ANDREA CESPEDES  Food is fuel, especially for serious runners who need a lot of energy. It may seem counterintuiti...