Blog List

Wednesday, 9 August 2017

This ancient building material could fuel a future infrastructure boom

Author


Bangladesh's capital city became home to the world's first cell tower constructed entirely out of bamboo — proof that emerging Asia can simultaneously tackle two of its most pressing concerns: infrastructure investment and renewable resources.
Developed by Malaysian infrastructure services firm edotco and the Bangladesh University of Engineering, the tower took just 12 days to build, versus 28 days for a traditional steel structure, and consumed less energy to manufacture.
Bamboo boasts a low carbon footprint as it produces oxygen and captures carbon dioxide during cultivation, while sourcing for steel causes scarring to landscapes from the mining of natural resources, edotco CEO Suresh Sidhu explained. The plant takes just six months to regenerate and can be re-harvested every three years without any environmental damage, he added.
The company intends to roll out more bamboo structures as proof of concepts in other parts of Dhaka this year and will gradually expand to other markets where the firm is present, such as Myanmar and Sri Lanka.
"We hope this (tower) will inspire infrastructure companies to focus on renewable materials," Sidhu told CNBC.
Abundant throughout Asia, especially China, bamboo has long been a go-to building material for construction players drawn to its tensile strength, light weight, low cost and mass quantities. In 2007, mainland China built the world's first truck-safe bamboo road bridge, which allows a maximum load of 90 tons, according to China Daily.
One of the potential drawbacks of bamboo in construction is its susceptibility to termites, mold attacks and other adverse climate conditions, but eco-friendly treatment processes such as borax coating can help.
While bamboo design has taken off globally — in 2008, Mexico City's Nomadic Museum was the world's largest bamboo structure — it's especially relevant for developing Asia.
A volunteer prepares bamboo poles while building makeshift school buildings in Champi, Kathmandu Valley, Nepal, on May 29, 2015.
Prashanth Vishwanathan / Bloomberg / Getty Images
A volunteer prepares bamboo poles while building makeshift school buildings in Champi, Kathmandu Valley, Nepal, on May 29, 2015.
The region will have to spend $26 trillion on public works by 2030 to maintain economic growth, according to a recent Asian Development Bank report, and industry players believe the use of sustainable building materials for public projects is a practical long-term solution to the region's infrastructure deficit.
Going green can create a win-win situation for economic development as it benefits industrialization, expansion of trade and productivity, the United Nations told a gathering of Asia's least developed nations last month. And as Asian heavyweights such as India and China promise to reduce their carbon emissions over the next 15 years as part of the Paris Agreement, renewables will be key.
"Bamboo's use in infrastructure projects will reduce carbon emissions considerably without compromising on development," said Neelam Manjunath, principal architect at Bangalore-based Manasaram Architects and a reputed bamboo advocate.
Her firm has incorporated the crop for various public infrastructure projects throughout India, including a bus shelter and metro station in Bangalore as well as a bridge and public toilets in New Delhi.
A mock-up of a Bangalore metro station to be built out of bamboo, designed by Manasaram Architects.
Mansaram Architects
A mock-up of a Bangalore metro station to be built out of bamboo, designed by Manasaram Architects.
Not only is bamboo one of the world's fastest growing plants, with some species growing up to 1.2 meters in a day, it's also well-suited for urban disasters, Manjunath pointed out.
"People don't die because of disasters, but because of buildings collapsing on them. Bamboo buildings are lighter and don't cause fatalities. Because of their sheer strength, bamboo buildings are also serviceable for much longer in the face of volatile weather."
Two expats in Bali, Indonesia have taken bamboo design to a new level: Among the island's rice paddies is a school campus built out of fifty plus bamboo structures.
Co-founded by John and Cynthia Hardy, the 23-acre facility known as The Green School, is one of Asia's largest bamboo structures and its curriculum focuses on holistic learning, particularly entrepreneurship and green living.
The Green School's design can be imitated throughout the globe, Hardy stressed in a 2010 TED talk. "Is this doable in your community? We believe it is. Green School is a model we built for the world."
For further details log on website :
https://www.cnbc.com/2017/04/19/bamboo-in-construction-a-green-alternative-that-could-fuel-an-asian-boom.html

Hydrolysis of cellulosic bamboo biomass into reducing sugars via a combined alkaline solution and ionic liquid pretreament steps

Author
Samuel KassayeKamal K. Pant and Sapna Jain
Renewable Energy, 2017, vol. 104, issue C, pages 177-184

Abstract: Dilute acid hydrolysis of cellulosic biomass is not only controlled by the reaction conditions such as temperature, concentration of acidic catalyst and hydrolysis time but also by changing the physical aspects of the reaction media. Therefore, overcoming the insolubility of cellulose by the use of effective solvent without having to derivatize their basic functional groups is of tremendous advantage in the utilization of lignocellulosic biomass. Ionic liquids are considered as the most suitable solvents to dissolve cellulosic biomass and overcome the recalcitrant nature of lignocellulosic biomass. This study investigates the valorisation of bamboo biomass regenerated from alkaline solution and ionic liquid pretreament steps followed by dilute sulphuric acid hydrolysis. Lignin removal from the biomass as a result of pretreatment steps was analysed by crystallinity index determination, surface morphology and thermal stability analysis. The solid biomass materials were characterized using FTIR, XDR, SEM, TGA and Elemental analysis techniques to investigate the effect of the pretreatment steps on the properties of the original bamboo biomass. Alkaline treatment was found to be effective against lignin and hemicellulose removal. However, it did not remove the complexity of the cellulosic portion of the biomass with equal success. The crystallinity of the recovered cellulosic biomass could be effectively reduced by using the ionic liquid pretreatment. Investigation revealed that the yield of total reducing sugars increased to 64% after alkaline solution pre-treatment in comparison to only 30% yield of reducing sugar in the untreated biomass sample. After both pretreatment steps, the yield of reducing sugar further increased to 80%.
Keywords: Bamboo biomassPretreatmentIonic liquidTRS yield (search for similar items in EconPapers)
Date: 2017
References: View references in EconPapers View complete reference list from CitEc
Citations Track citations by RSS feed

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0960148116310874
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text
Persistent link: http://EconPapers.repec.org/RePEc:eee:renene:v:104:y:2017:i:c:p:177-184
Access Statistics for this article
Renewable Energy is currently edited by Soteris A. Kalogirou and Paul Christodoulides
More articles in Renewable Energy from Elsevier
Series data maintained by Dana Niculescu (repec@elsevier.com).


For further details log on website :
http://econpapers.repec.org/article/eeerenene/v_3a104_3ay_3a2017_3ai_3ac_3ap_3a177-184.htm

Regional Disparities in Profitability of Rice Production: Where Small Farmers Stand?

Author
A. Amarender Reddy
Indian Journal of Agricultural Economics, 2015, vol. 70, issue 3

Abstract: Economic liberalisation policies introduced since the early 1990s helped in accelerating growth of the economy, but it also increased farmers’ distress especially among marginal and small farmers in the backward states. The accelerated farm mechanisation, increased share of purchased inputs, fluctuation in prices and higher wage rates increased the vulnerability of small farmers than large farmers. In this context, historical inverse relationship between farm size and productivity has changed into positive one, with larger farms getting the advantage of large scale mechanisation and technology. The paper revisits the farm size and productivity debate at the state level by using unit level data of cost of cultivation for rice crop. The paper has found that, there is convergence of yield of rice across states mainly helped by convergence in fertiliser, irrigation and farm machinery use. However, there was widening gap between bottom 25 per cent and top 25 per cent (based on farm size) of the farmers in terms of yields, gross returns, profitability. The condition of tenant-small farmers was more precarious due to high land rents (50 per cent of total cost). The share of loss making farms is 17 per cent among bottom 25 per cent of the farmers compared to only 3 per cent among top 25 per cent of the farmers. The distress of small farms is aggravated by higher risk in profitability. Most of the farmers in states like Punjab, Haryana, Andhra Pradesh, Tamil Nadu and Gujarat are getting reasonable profits, while farmers of Maharashtra, Jharkhand, Assam, Bihar and Orissa are earning meagre profits. Use of modern inputs (farm machinery use and fertiliser use) helped in increasing profitability, while use of traditional inputs (animal labour and manure) are associated with losses. There was a convergence in the use of modern inputs across states, which have the potential to reduce inter-state disparities in profits and yields. The regression results show that there was a positive relation between farm size and profitability after controlling for state structural variables and input use.
Keywords: Economic liberalisationFarmer’s distress.Community/Rural/Urban DevelopmentCrop Production/IndustriesFarm ManagementQ11Q12Q16 (search for similar items in EconPapers)
Date: 2015
References: View references in EconPapers View complete reference list from CitEc
Citations Track citations by RSS feed

Downloads: (external link)
http://purl.umn.edu/230051 (application/pdf)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text
Persistent link: http://EconPapers.repec.org/RePEc:ags:inijae:230051
Access Statistics for this article
More articles in Indian Journal of Agricultural Economics from Indian Society of Agricultural Economics Contact information at EDIRC.
Series data maintained by AgEcon Search (aesearch@umn.edu).


For further details log on websit :
http://econpapers.repec.org/article/agsinijae/230051.htm

Optimising Irrigation Water Use in Punjab Agriculture: Role of Crop Diversification and Technology

Author
Baljinder KaurKamal Vatta and R.S. Sidhu
Indian Journal of Agricultural Economics, 2015, vol. 70, issue 3

Abstract: A linear programming model has been formulated to suggest the optimal cropping pattern for maximising net returns and ensuring significant savings of groundwater with the aim of sustaining groundwater use in the Punjab agriculture. The dominance of paddy-wheat crop rotation has led to overexploitation of ground water resulting in rapid decline of water table in the entire state. The existing ground water draft for irrigation is 3.41 m ha m whereas the annual ground water availability is 2.03 m ha m, indicating a deficit of 1.38 m ha m of groundwater resources – a case of severe water imbalance in state. Diversifying agriculture towards less water consuming crops and use of resource conservation technologies is of utmost importance. The present study attempts to suggest a diversification plan for achieving water sustainability. The results revealed that a shift of area under maize and basmati in plan –I, resulted into a significant water saving of 8 per cent. The water saving amounted to 16.16 per cent when new crop activities, like paddy sown directly in the fields, i.e. resource conservation practices (DSR) technology and paddy sown by conventional method but irrigation scheduled by the use of tensiometer were introduced without any adverse impact on productivity.
Keywords: Water sustainabilityCrop plansTechnology.Crop Production/IndustriesEnvironmental Economics and PolicyLand Economics/UseQ15Q16Q25 (search for similar items in EconPapers)
Date: 2015
References: View references in EconPapers View complete reference list from CitEc
Citations Track citations by RSS feed

Downloads: (external link)
http://purl.umn.edu/230064 (application/pdf)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text
Persistent link: http://EconPapers.repec.org/RePEc:ags:inijae:230064
Access Statistics for this article
More articles in Indian Journal of Agricultural Economics from Indian Society of Agricultural Economics Contact information at EDIRC.
Series data maintained by AgEcon Search (aesearch@umn.edu).


For further details log on website:
http://econpapers.repec.org/article/agsinijae/230064.htm

Tuesday, 8 August 2017

Properties of Rubberwood Medium-Density Fiberboard Bonded with Starch and Urea-Formaldehyde

Author
Songklod JarusombutiPiyawade BauchongkolSalim Hiziroglu, and Vallayuth Fueangvivat
The authors are, respectively, Associate Professor, Dept. of Forest Products, Kasetsart Univ., Bangkok, Thailand  Wood Technologist, Royal Forest Dept., Bangkok, Thailand  Professor, Dept. of Natural Resource Ecology and Management, Oklahoma State Univ., Stillwater  [corresponding author]); and Wood Technologist, Royal Forest Dept., Bangkok, Thailand ). This paper was received for publication in September 2011. Article no. 11-00114.
Article Citation:

Abstract

The objective of this study was to evaluate some of the properties of experimental medium-density fiberboard panels made from rubberwood (Hevea brasiliensis) using a combination of cassava (Manihot utilissima) starch and a low percentage of urea-formaldehyde (UF) resin as a binder. Experimental panels with density levels of 0.65 and 0.80 g/cm3 were made using 10 percent starch, 10 percent starch and 3 percent UF, and 10 percent UF for the control samples. The panels manufactured with 10 percent starch did not have satisfactory physical and mechanical properties based on Japanese Industrial Standards. However, average modulus of elasticity, modulus of rupture, and thickness swelling values of the sample types E and F manufactured using a combination of starch and UF were 2,044 MPa, 22.49 MPa, and 35.50 percent, respectively, which met required limits listed in Japanese Industrial Standard A-5908. The results of this study indicated that starch can be used as a viable alternative binder with limited addition of UF resin without having any significant adverse influence of bending properties of the samples. Based on formaldehyde emission tests, specimens made with 3 percent UF had an average value of 18.5 mg/100 g, while control samples having 10 percent UF resulted in 38.5 mg/100 g.

For further details log on website :
http://www.forestprodjournals.org/doi/abs/10.13073/FPJ-D-11-00114.1?code=frps-site

Sunday, 6 August 2017

Kreg Accu-Cut Turns any Circ Saw Into a Track Saw

Author
by David Lyell
page 16
In my shop, the track saw doubles as a second table saw – and if you’d like a low-priced alternative to a track saw, consider Kreg’s newest offering: the Accu-Cut Circular Saw Guide System. This jig uses set screws to attach a sled to the top of just about any non-worm-drive circular saw shoe (left- or right-hand blade) to allow it to perform like a track saw.
The kit includes two 24″ tracks that provide a 48″ rip capability when coupled. A “starting block” provides a steady platform for your saw before the cut begins. There is, however, no option to extend the track length to 96″ – for that, Kreg’s Rip-Cut jig, is a convenient option because they share the same sled.
The Accu-Cut’s “guide strip” forms a zero-clearance fit with the blade after your first pass along the track. When equipped with the recommended 40-tooth blade, I had virtually no tear-out on 34“-thick veneered plywood. But I did experience some slight flex between the saw, sled and track that resulted in a slight bevel. The Accu-Cut is suited for breaking down sheet goods, not for making finish cuts (arguably true for any track saw in most fine furniture applications).
From the October 2017 issue, #234

For further information log on website :
http://www.popularwoodworking.com/articleindex/kreg-accu-cut-turns-circ-saw-track-saw-3

Woodworking Projects

The Basics of Cabinet Making
Hearing that someone is a cabinetmaker tends to bring respect for the woodworking skills of the person described. That's as it should be, but the skills are neither arcane, nor impossible for the average woodworker to gain. After all, most of us feel anyone can make a good box and cabinets are really nothing more than big boxes. Size imposes some extra demands, and limits, but otherwise, cabinetmaking is box making enlarged.

Cabinetmaking as a skill set has so many facets that almost any woodworker with a decent level of interest, and a modest number of tools, can become competent in some part of the field. Overall competence takes longer, of course, but learning to make shop cabinets is a good scheme for starting on the acceptably easy end. After all, if you mess up, they're only shop cabinets. Or you can start with a simple rolling cabinet for tools, or other of life's necessities, such as a kitchen island or rolling kitchen or tool support cabinet.

Square It Up

Until cabinetmaking progresses into furniture making, the joints remain fairly simple: the hardest requirement is to make absolutely certain that all measurements are accurate and all corners are square. Basically, that means your first need in making cabinets is to go through your shop and make sure all tools are squared away. Check the table saw to make sure the fence is parallel to the saw blade, which you will already have checked to make sure it is parallel to the miter slot. Make sure, too, that each time the fence is locked it remains parallel to the blade. Check the verticality of the blade at this point. An engineer's level is excellent for this purpose, ensuring accuracy because you base everything on that 90° and the parallelism to the fence. Check the fence face, too. Check next for accuracy at a 45°. Make sure the fence face is 90° to the saw's table surface.
"Standard cabinet making is based on the right angle. If you get that 90° correct, measure other angles and distances carefully, and don't slop up the assembly, you are going to make some good, solid cabinets."
Repeat the process with the jointer fence, making sure it locks at 90° and stays there during use, doesn't sag away or creep), as it also must at 45°.

Another set-up repetition comes with your compound miter saw. Get it square and then check intermediate angle settings for accuracy.

Most good tools remain accurate for a considerable length of time after the original work of setting them up. Some will be obviously off in short order, but with others, you may not notice until you've wasted wood. Keeping a small engineer's square in an apron pocket is a good way to prevent problems. Check every few days to see that settings that claim to be square really are still 90° You'll quickly learn which of your tools are most likely to slip out of adjustment most often. Among these you'll find the radial arm saw and the compound miter saw.

At this point, you want to review all you've ever heard about getting smooth cuts with the various types of saw blades. Working with face frames calls for a top grade 24 to 30 tooth finish rip blade. Working with laminates and MDF and similar manufactured materials requires a superb laminate cutting blade, one that resists the abrasive action of the adhesives in the manufactured wood products and the resins in the laminates. Fortunately, most of today's blades are carbide tipped, because that is what you absolutely need for cutting particleboard and MDF, and for slicing laminates. Carbide teeth also last a lot longer in regular use than does high speed steel so that high speed steel blades are now used mostly in special circumstances (when nails or other metals might be found in the wood being cut, for example).

Get Ready

Check your blades and make sure they're sharp, free of gum and pitch, and ready to go. Measuring and marking tools come next. The tips here are handy for all types of projects, as well as for making cabinets, so you might want to file them away:
  • Use the shortest tape measure the job requires (obviously, you're not going to use a 10' tape measure to work out cabinet dimensions for a 28' kitchen, but most of us don't want to be lugging a 33' tape measure to measure a 10' x 12' kitchen). If you use more than one tape measure on the job, measure and compare several distances with both tapes to see how they differ. Carefully note those differences and allow for them in use.

  • Learn to make and use story sticks. Story sticks almost eliminate the need for measurements by any other means.

  • Always treat squares gently. Get hold of an accurate framing square and an accurate try square and check their squareness often, resetting as needed

  • Use a marking knife instead of a pencil when laying out cuts. Save the pencil for your story stick.

  • Use a compass or a Contour Scribe to mark cabinets for installation against walls and molding. Use a rasp, scroll saw, or belt sander to shape to fit.

  • Develop consistency in measuring and marking, including the transfer of measurements to tools when needed for making cuts. For example, if you're going to split your mark one time, do it every time. If you're going to cut to the left of the mark once, do it every time. Move your mark for corresponding accuracy, do not move your cut.

  • There is an awe-inspiring range of tools for every cabinetmaking job. You don't need them all, but you do need some. Consider carefully what the job is going to force you to have on hand. Then make sure you have those tools.
Slicing The Sheets 

Most sheet material cutting can be done on a framework that includes several 2 x 4s, a couple of sawhorses and a chunk of 2" thick Styrofoam (or other plastic insulation board). Add a good quality straightedge or a cutting jig to a top quality blade on your circular saw, and you'll get cuts accurate enough for almost any cabinetmaking job, though the final cut is usually more accurately done with a table saw with a wide (50" or 52") capacity fence, and a large outfeed table. A standing, or vertical, panel saw makes it easier, as well as more accurate, but is an expensive tool for the hobbyist. 
Kreg Rip-Cut Saw GuideSome Styrofoam, a shop built straightedge guide for your circular saw, and a top quality saw blade for all length cuts is all it takes. A little extra time and care is required when transferring measurements, but once the guide is clamped in place, accurate cutting is easy. Laminates can be trimmed with a laminate cutter and rolled into the contact cement using a J roller, both inexpensive tools. Veneer edge trimmers also work for laminates, so special power laminate trimmers, and the bits for them, are not essential (though they ease trimming work by a fantastic degree: the bits can be used in any 1/4" chuck router, too). 

When the time comes to put doors on your cabinet carcass (box), you'll probably find a need for more power tools. The doors themselves can be built on the table saw (including doing the raised paneling, if any), or they can be done with a table saw and a shaper, or a table saw and a router table. One of the latter two choices eases work considerably, and usually results in a better looking job (normally, using a shaper or router table gives a raised panel that needs much less sanding than does one produced on a table saw), allowing more professional finishing procedures. 

Standard cabinetmaking is based on the right angle. If you get that 90° correct, measure other angles and distances carefully, and don't slop up the assembly, you're going to make some good, solid cabinets. It's when we come to the extras, the special joinery for decorative or structural purposes, the pieces that move out and away from security as base or wall cabinets and into the furniture arena, that we see real complexity rearing its lovely head. That extra fancy joinery is not necessary, and can even be counterproductive when you're producing cabinets, whether for your shop, kitchen, bath or any other room in a house. For the most part, cabinets are joined using butt joints, rabbet joints, dadoed joints, and pocket screws, biscuits or dowels for extra strength, or speed (or both), in assembly. The beauty in most cabinets in the home comes from raised panels, wood grain and the general proportions of the cabinets themselves. When you start making furniture in addition to cabinets, then the dovetail joints, finger joints, mortise and tenons and other more complex techniques come into play. 

Learn to make the basic cabinets needed around a home and shop. Branch out from that point, making, as you desire, fancier cabinets, or move on over into furniture where artistry and craftsmanship can be far more demanding than simple cabinetmaking. 


More Woodworking Projects


For further information log on website :
http://www.woodworking-news.com/woodworking-projects/cabinet-making-basics.shtml

Cabinetmaking


Cabinetmaking
Cabinetmaking involves more than simply designing, building, and repairing cabinets. It encompasses working with a variety of structures such as doors, windows and window frames, and all types of furniture. Cabinetmakers use many types of materials in this work, including veneer, fiberboard, particle board, hardboard, plywood, adhesives, abrasives, hardware and metal fastenings. They must follow blueprints and designer specifications exactly to construct and repair these wooden articles. Accuracy is imperative as they regularly need to fit small parts and sub-assemblies together, to precisely make and install cupboards and cases and to operate woodworking machines to cut and form parts. Today sophisticated equipment, basic woodworking machines, and portable power and hand tools are used to perform many of the job functions.
Cabinetmakers must have a broad knowledge of wood, its structures and properties, and an assortment of cabinetry hardware and materials. A worker with training and education could start in production and work their way up to a supervisory or management position in the wood industry, as the skills are transferable to a number of other professions.

Main duties

Cabinetmakers perform some or all of the following duties:
  • Study plans, specifications or drawings of articles to be made, or prepare specifications
  • Mark outlines or dimensions of parts on wood
  • Operate woodworking machines, such as power saws, jointers, mortisers and shapers, and use hand tools to cut, shape and form parts and components
  • Trim joints and fit parts and subassemblies together to form complete unit using glue and clamps and reinforce joints using nails, screws or other fasteners
  • Sand wooden surfaces and apply veneer, stain or polish to finished products
  • Repair or restyle wooden furniture, fixtures and related products
  • May estimate amount, type and cost of materials required.

Who do they work for?

  • Self-employed
  • Furniture manufacturing
  • Repair companies
  • Construction firms
  • Cabinetmaking contractors

Sample titles

  • Bench Carpenter
  • Furniture maker
  • Woodworking Machine Operator
  • Cabinetmaker
  • Cabinetmaker apprentice
  • Custom wood furniture maker

Essential Skills

  • Document use
  • Numeracy
  • Problem Solving
  • Decision Making
For full Essential Skills profile click here

How to join the field

  • Completion of secondary school is usually required.
  • Completion of a four-year apprenticeship program or A combination of over four years of work experience in the trade and some high school or college courses in cabinetmaking is usually required to be eligible for trade certification.
  • Trade certification is available, but voluntary, in all provinces and territories.
  • Red Seal endorsement is also available to qualified cabinetmakers upon successful completion of the interprovincial Red Seal examination.

Salary

Between $13.50 and $29.00. Annual salaries between $28,000 to $63,000

For more information, contact:

Skills/Compétences Canada
294 Albert Street, Suite 201
Ottawa, ON K1P 6E6
Tel: 877 754 5226
Website : http://skillscompetencescanada.com/en/

For further information log on website :
https://skillscompetencescanada.com/en/skills/construction/cabinetmaking/

Friday, 4 August 2017

Question Bank on Forestry competitive examinations

Author
14.61 · Kerala Agricultural University

xyz

Abstract

The book is “Question Bank on Forestry for all competitive examinations”. It deals with all syllabus of general forestry for all competitive exam such as JRF, SRF, SET, ASRB, UPSC, ICFRE, SAU’s, NET, SET, FOREST GUARD, FOREST RANGER, ACF, IBPS, Agricultural Coordinator and various entrance examination of agricultural universities of forestry graduates as well as agricultural back ground. The compilation is an endeavour to present, present day relevant questions in userfriendly / systematic in more reliable way. The questions presented in this book are mostly memory based which has asked in various examination. These set of questions will give the candidates an idea about the question pattern of the above mentioned exams and will be help to those student who wants to pursue their career in Forestry and Agroforestry. 

Question bank on Forestry competitive examinations


Available from: https://www.researchgate.net/publication/284730411_Question_bank_on_Forestry_competitive_examinations [accessed Aug 3, 2017].

For further details log on website :
https://www.researchgate.net/publication/284730411_Question_bank_on_Forestry_competitive_examinations

Comparison of sapling demography of four dipterocarp species with different seed-dispersal strategies

Published Date
Received 15 June 2004, Revised 5 December 2004, Accepted 5 December 2004, Available online 14 January 2005.

https://doi.org/10.1016/j.foreco.2004.12.002

Author
YayoiTakeuchia. Numbers and letters correspond to the affiliation list. Click to expose these in author workspaceOpens the author workspaceOpens the author workspace. Author links open the author workspace.TanakaKentab. Numbers and letters correspond to the affiliation list. Click to expose these in author workspaceOpens the author workspace. Author links open the author workspace.TohruNakashizukac. Numbers and letters correspond to the affiliation list. Click to expose these in author workspaceOpens the author workspace
a
Center for Ecological Research, Kyoto University, Kamitanakami Hirano-cho, Otsu 520-2113, Japan
b
Tomakomai Experimental Forest, Hokkaido University, Takaoka, Tomakomai 053-0035, Japan
c
Research Institute for Humanity and Nature, Takashima-cho, Kamigyo-ku, Kyoto 602-0878, Japan

Abstract

To determine the relative roles of seed dispersal in regeneration, we compared the spatial distribution and demography of four co-occurring dipterocarp species with different seed dispersal strategies: two long-distance seed dispersers with winged seeds (Dipterocarpus globosus and Shorea beccariana) and two short-distance dispersers with wingless seeds (D. tempehes and S. laxa). The spatial distribution and dynamics of saplings of the four species were investigated to test whether seed dispersal confers benefits with respect to either increasing the availability of safe sites or avoiding high mortality near conspecific adults. The median distance between a sapling and the nearest conspecific adult increased with sapling size in the long-distance dispersers. The saplings of short-distance dispersers were largely aggregated near conspecific adults, and the median distance did not change with sapling size. Light- and topography-dependent mortality and density/distance-dependent mortality were observed in some size classes of saplings of both long-distance dispersers. However, the mortality of short-distance dispersers did not show clear density dependence, partly because of the low mortality. We concluded that the functions of long-distance seed dispersal, i.e., escape or colonization, differ with size in D. globosus and S. beccariana, while the short-distance seed dispersers D. tempehes and S. laxa have other mechanisms to avoid mortality.

For further details log on website :
http://www.sciencedirect.com/science/article/pii/S0378112704008448

Advantages and Disadvantages of Fasting for Runners

Author BY   ANDREA CESPEDES  Food is fuel, especially for serious runners who need a lot of energy. It may seem counterintuiti...