Mechanical Properties of Kenaf/Fiberglass Polyester Hybrid Composite

Published Date

2012, Vol.41:1654–1659, doi:10.1016/j.proeng.2012.07.364

International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012)

Open Access, Creative Commons license

Title 

Mechanical Properties of Kenaf/Fiberglass Polyester Hybrid Composite

• Author 

• M.A.A. Ghani ^,
• Z. Salleh
• Koay Mei Hyie
• M.N. Berhan
• Y.M.D. Taib
• M.A.I. Bakri

• Faculty of Mechanical Engineering, University of Technology MARA 40450 Shah Alam Selangor Malaysia

Available online 25 August 2012.

Abstract

In a view to reduce the cost of production and the harmful destruction in normal environment, there's a lot of research have been conducted or still ongoing for the possibility of using natural fibers which are wholly degradable in the combination of biodegradable thermoplastic materials. This research will focus on Kenaf; an extremely valuable natural fiber with robust mechanical properties. In this research, kenaf fiber/fiberglass reinforced with unsaturated polyester composites were subjected to water absorption test. Water absorption test were conducted by immersing specimens into three different environmental conditions including sea water, distilled water and rain water (acidic solutions) at room temperature from 1st day until 4th week. The effect of the mechanical strength of the hybrid composties is investigated. In general, the mechanical properties of kenaf fiber are deteriorated after the moisture penetrates into the composite. The strain to failure increases from 1st day until 3rd week followed by a drastically drop at 4th week. The humidity aging is one of the evidence found in SEM micrograph which contributes to the reduction of tensile modulus.

Keywords

Polyester composite

kenaf fiber

tensile

water absorption

fiber glass

---

References

1. • [1]
   • Hazizan MdAkil, Leong Wei Cheng, ZA. Mohd Ishak, A. Abu Bakar, M.A. Abd Rahman, 2009. Water Absorption Study on Pultruded Jute Fiber Reinforce Unsaturated Polyester Composite, Composites Sciences and Technology, 691942-1948.
2. • [2]
   • Norlin Nosbi, Hazizan Md Akil, Z.A. Mohd Ishak, A. Abu Bakar, 2010. Degradation of compressive properties of pultured kenaf fiber reinforced composites after immersion in various solutions, Materials and Design, 31, p. 4960-4964.
3. • [3]
   • Kim H.J., Seo D.W., 2006. Effect of the water absorption fatigue in mechanical properties of sisal Textile-reinforced composite, Int J Fatigue, 28, p. 1307-14.
4. • [4]
   • H.M. Akil, M.F. Omar, A.A. M. Mazuki, S. Safiee, Z.A.M. Ishak, A. Abu Bakar, 2011. Kenaf Fiber Reinforced Composites: A Review, Material and Design, 32, p. 4107-4121.
5. • [5]
   • Gu H., 2009. Dynamic mechanical analysis of the seawater treated glass/polyester composites, Mater Des, 30, p. 2774-7.
6. • [6]
   • Gerard J.F., Perret P., Chabert B., 1990. Study of carbon/epoxy interphase: affect of surface treatment of carbon fibers on dynamic mechanical behavior of carbon/epoxy unidirectional composites, Elsevier Applied Science, p. 449-56.
7. • [7]
   • Merdas I., Thomiatte F., Tcharkhtchi A., Verdu J., 2002. Factors Governing Water Absortion by Composite Matrices, Compos Sci Technol, 62, p. 487-92.

• ⁎ 
  Corresponding author. Tel.: +6 03 55436209; fax: +6 03 55435160

For further details log on website :
http://www.sciencedirect.com/science/article/pii/S1877705812027646