Particulate Filled and Short Fiber Reinforced Polymer Composites

Published Date
Reference Module in Materials Science and Materials Engineering
2016, doi:10.1016/B978-0-12-803581-8.03837-6
Current as of 28 October 2015.

• Author 

• P.K. Mallick

Abstract

This chapter provides a review of the mechanical and thermal properties of particulate filled and short fiber reinforced polymer composites. It starts with a brief description of the common particulate fillers used in the plastics industry and then discusses the elastic and strength properties of particulate filled polymers. Characteristics of short fiber reinforced polymers are discussed next and emphasis is given on their modulus and strength predictions. The chapter ends with descriptions and properties of several short fiber reinforced composites, such as SMC, BMC, CSM, SFT and LFT.

Keywords

BMC

CSM

Fillers

Fracture

Injection molding

LFT

Modulus

Particulates

SFT

Short Fibers

SMC

Strength

Thermal Expansion

---

Figure 1.

 Table 1

Table 1.

Figure 2.

 Table 2

Table 2.

 Table 3

Table 3.

 Table 4

Table 4.

 Table 5

Table 5.

Figure 3.

Figure 4.

Figure 5.

Figure 6.

Figure 7.

Figure 8.

Figure 9.

 Table 6

Table 6.

Figure 10.

Figure 11.

Figure 12.

Figure 13.

Figure 14.

Figure 15.

Figure 16.

Figure 17.

Figure 18.

 Table 7

Table 7.

Figure 19.

 Table 8

Table 8.

Figure 20.

Figure 21.

 Table 9

Table 9.

 Table 10

Table 10.

Figure 22.

Figure 23.

 Table 11

Table 11.

 Table 12

Table 12.

Figure 24.

 Table 13

Table 13.

Figure 25.

 Table 14

Table 14.

 Table 15

Table 15.

Figure 26.

Figure 27.

 Table 16

Table 16.

 Table 17

Table 17.

 Table 18

Table 18.

 Table 19

Table 19.

 Table 20

Table 20.

Figure 28.

Figure 29.

 Table 21

Table 21.

Figure 30.

 Table 22

Table 22.

Figure 31.

Figure 32.

Figure 33.

Figure 34.

 Table 24

Table 24.

Figure 35.

 Table 23

Table 23.

• ☆
  Change History: June 2015. P.K. Mallick made the following changes: (1) In the title, author has added ‘Filled’ after ‘Particulate’ so that the new title is ‘Particulate Filled and Short Fiber Reinforced Polymer Composites’. (2) A new paragraph has been added in Pages 2 and 14. (3) The title of Section 2 has been changed. (4) Section 7.3 has been shortened. (5) A new Section 8 and a reference have been added.
  
  

For further details log on website :
http://www.sciencedirect.com/science/article/pii/B9780128035818038376