Effect of high temperature processing under different environments on physical and surface properties of rubberwood (Hevea brasiliensis)

Title

Effect of high temperature processing under different environments on physical and surface properties of rubberwood (Hevea brasiliensis)

Journal

Journal of the Indian Academy of Wood Science
Volume 11, Issue 2 , pp 182-189

Cover Date

2014-12

DOI

10.1007/s13196-014-0135-x

Print ISSN

0972-172X

Online ISSN

0976-8432

Publisher

Springer India

Additional Links

• Register for Journal Updates
• Editorial Board
• About This Journal
• Manuscript Submission
• 
  

Author Affiliations

• 1. Wood Properties and Uses Division, Institute of Wood Science and Technology, Malleshwram P.O., Bangalore, 560 003, India

• S. R. Shukla 
• , S. K. Sharma

Abstract

Plantation grown Hevea brasiliensis (rubberwood) was thermally processed in a vacuum-pressure oven in the temperature range of 150–240 °C under two inert environments (vacuum and nitrogen gas) and normal atmospheric pressure (air). Effect of heat treatments on various physical properties of rubberwood such as equilibrium moisture content (EMC), specific gravity, water uptake, shrinkage, colour and surface roughness profiles was evaluated and compared with untreated wood. The EMC of rubberwood was found to be reduced by almost half while specific gravity was reduced slightly after heat treatment. The intensity of darker brown colour was increased with increasing heat treatment temperatures and colour change was observed to be uniform throughout the wood blocks. Dimensional stability, water resistance, colour and surface quality were observed to be improved after thermal processing of rubberwood at moderately high temperatures under inert environments without affecting other properties deleteriously. Based on improved properties, heat treated rubberwood was found to be suitable for nonstructural applications such as flooring, siding, paneling etc.

Keywords

Heat treatment Plantation species Shrinkage Roughness Dimensional stability

References 

1. Anon (1986) IS:1708. Indian standard for ‘Methods of testing small clear specimens’. Bureau of Indian Standards, New Delhi
2. Anon (1989) IS:3670. Indian standard for ‘Construction of timber floors-code of practice.’ (First Revision). Bureau of Indian Standards, New Delhi
3. Anon (2003) ThermoWood Handbook, Finnish Thermowood Association, Wood Focus Oy, Helsinki
4. Anon (2012) Mitutoyo surface roughness tester-Mitutoyo Surftest SJ-401. Mitutoyo Corporation, Kawasaki
5. Ayrilmis N, Jarusombuti S, Fueangvivat V, Bauchongkol P (2011) Effects of thermal treatment of rubberwood fibres on physical and mechanical properties of medium density fibreboard. J Trop For Sci 23(1):10–16
6. Boonstra MJ, Van Acker J, Pizzi A (2007) Anatomical and molecular reasons for property changes of wood after full-scale industrial heat-treatment. In: Proceedings third European conference on wood modification, Cardiff, 15–16th Oct 2007, pp 343–358
7. Bourgois J, Janin J, Guyonnet R (1991) The color measurement: A test method to study and to optimize the chemical transformations undergone in the thermally treated wood. Holzforschung 45(5):377–382CrossRef
8. Dwianto W, Inoue M, Tanaka F, Norimoto M (1996) The permanent fixation of compressive deformation in wood by heat treatment. In: Proceedings from the third pacific rim bio-based composites symposium, Kyoto, pp 231–239
9. Emmler R, Scheiding W (2007) Darker shades of wood: thermally modified timber (TMT) as a new material for parquet floorings. Eur Coat J 4:106–111
10. González-Peña MM (2012) Improvement of the biological performance and dimensional stability of two tropical woods. Paper presented in 43rd IRG Annual Meeting, Kuala Lumpur, Malaysia, 6–10 May, IRG/WP 12-40605. The International Research Group on Wood Protection, Stockholm
11. Gunduz G, Korkut S, Korkut DS (2008) The effects of heat treatment on physical and technological properties and surface roughness of Camiyanı Black Pine (Pinus nigra Arn. subsp. pallasiana var. pallasiana) wood. BioRes Technol 99:2275–2280CrossRef
12. Hill CAS (2006) Wood modification—chemical, thermal and other processes. Wiley, Chichester 239CrossRef
13. Hillis WE (1984) High temperature and chemical effects on wood stability. I. General considerations. Wood Sci Technol 18(4):281–293CrossRef
14. Hofmann T, Retfalvi T, Albert L, Niemz P (2008) Investigation of the chemical changes in the structure of wood thermally modified within a nitrogen atmosphere autoclave. Wood Res 53(3):1–14
15. Hsu WE, Schwald W, Schwald J, Shields JA (1988) Chemical and physical changes required for producing dimensionally stable wood-based composites. Part I: steam pretreatment. Wood Sci Technol 22:281–289CrossRef
16. Kamdem DP, Pizzi A, Jermanaud A (2002) Durability of heat-treated wood. Holz Roh Werkstoff 60(1):1–6CrossRef
17. Korkut S, Akgul M (2007) Effect of drying temperature on surface roughness of oak (Quercus petraea Steven ex Bieb Krassiln) veneer. Build Environ 42(5):1931–1935CrossRef
18. Metsa-Kortelainen S, Antikainen T, Viitaniemi P (2006) The water absorption of sapwood and heartwood of Scots pine and Norway spruce heat-treated at 170 °C, 190 °C, 210 °C and 230 °C. Holz Roh- Werkstoff 64:192–197CrossRef
19. Niemz P, Bekhta P (2003) Effect of high temperature on the changes in color, dimensional stability and mechanical properties of spruce wood. Holzforschung 57(5):539–546
20. Niemz P, Hofmann T, Retfalvi T (2010) Investigation of chemical changes in the structure of thermally modified wood. Maderas-Ciencia Y Tecnologia 12(2):69–78
21. Obataya E, Tomita B (2002) Hygroscopicity of heat-treated wood. II Reversible and irreversible reductions in the hygroscopicity of wood due to heating. Mokuzai Gakkaishi 48(4):288–295
22. Obataya E, Tanaka F, Norimoto M, Tomita B (2000) Hygroscopicity of heat-treated wood I: effects of after-treatments on the hygroscopicity of heat-treated wood. Mokuzai Gakkaishi 46(2):77–87
23. Rep G, Pohleven F (2001) Wood modification–a promising method for wood preservation. Drvna industrija 52(2):71–76
24. Repellin V, Guyonnet R (2005) Evaluation of heat-treated wood swelling by differential scanning calorimetry in relation to chemical composition. Holzforschung 59:28–34CrossRef
25. Sailer M, Rapp AO, Leithoff H, Peek RD (2000) Upgrading of wood by application of an oil heat treatment. Holz als Roh Werkstoff 58(1/2):15–22CrossRef
26. Sundquist B (2004) Colour changes and acid formation in wood during heating. Doctoral thesis. Divisions of Wood Material Science. Lulea University of Technology, Skellefta
27. Zivkovic V, Prsa I, Turkulin H, Sinkovic T, Jirous-Rajkovic V (2008) Dimensional stability of heat treated wood floorings. Drvna Industrija 59(2):69–73

For further details log on website :

http://link.springer.com/article/10.1007%2Fs13196-014-0135-x