Treated Tropical Wood Sawdust-Polypropylene Polymer Composite: Mechanical and Morphological Study

Published Date

DOI: 10.4236/jbnb.2011.24053

Author(s)  

M. A. M. Mohd Idrus, S. Hamdan, Md. Rezaur Rahman, Md. S. Islam

ABSTRACT

In this research, composites based on treated tropical sawdust and polypropylene (PP) were prepared using hot press molding machine. Raw sawdust was chemically treated with monomer, 2 - ethylhexyl methacrylate in order to improve the mechanical properties of the composites. The influence of the chemically treated sawdust on the physical and mechanical properties of sawdust-PP composites were investigated at various loading level from 10 wt.% up to 30 wt.%. Results indicate that the mechanical properties of the chemically treated sawdust–PP composites were found to be higher than those of the raw ones respectively. The surface morphology obtained from scanning electron microscopy (SEM) showed that raw sawdust–PP composites possess surface roughness and weak interfacial adhesion between the matrix and the filler while the chemically treated one showed improved filler–matrix interaction. This indicates that better dispersion of the filler with the PP matrix has occurred upon chemical treatment of the filler. Water absorption tests showed that composites prepared from the chemically treated sawdust absorb lower amount of water compared to the ones prepared from raw sawdust, suggesting that hydrophilic nature of the cellulose in the sawdust has significantly decreased upon chemical treatment.

KEYWORDS

Wood Sawdust, Polypropylene, Mechanical Properties, Water Absorption

Cite this paper

M. Idrus, S. Hamdan, M. Rahman and M. Islam, "Treated Tropical Wood Sawdust-Polypropylene Polymer Composite: Mechanical and Morphological Study," Journal of Biomaterials and Nanobiotechnology, Vol. 2 No. 4, 2011, pp. 435-444. doi: 10.4236/jbnb.2011.24053.

References

[1]	Bledzki AK, Gassan J. Composites reinforced with cellulose based fibres. 1999, Prog. Polym. Sci., pp. 24: 221-274.
[2]	Han-Seung Yang, Hyun-Joong Kim, Hee-Jun Park, Bum- Jae Lee, Taek-Sung Hwang. Water absorption behavior and mechanical properties of lignocellulosic filler–polyolefin bio-composites.2006, Composite Structures, pp. 72: 429-437.
[3]	M., Ahmad I and Mei T. Mechanical and Morphological studies of rubber wood sawdust-filledUPR composite based on recycled PET. 2009, Journal of Polymer-Plastics Technology and Engineering, Vol. 48, pp. 1262- 1268.
[4]	Rana, A. K., Mandal, A., and Bandyopadhyay, S. Short jute fiber reinforced polypropylene composites: Effect of compatibiliser, impact modifier and fiber loading. 2003. Comp. Sci Tech., Vol. 63, pp. 801-806.
[5]	Sanadi AR, Caulfield DF, Jacobson RE, Rowell RM. Renewable agricultural fibers as reinforcing fillers in plastics: Mechanical properties. 1995, Ind Eng Chem Res, Vol. 34, pp. 1889-1896.
[6]	Bledzki AK, Faruk O. Sperber VE. Cars from biofibres.5, 2006, Macromol Mater Eng, Vol. 291, pp. 449-457.
[7]	Bledzki AK, Letman M, Viksne A, Rence L. A comparison of compounding processes and wood type for wood fibre-PP composites. 6, 2005, Composites A, Vol. 36, pp. 789-797.
[8]	S. S., Modak, J. M., and Chanda, M. 2007, Mechanical properties of wood-fiber reinforced polypropylene composites. Karmakar, A., Chauhan, Comp. A, Vol. 38, pp. 227-233.
[9]	Maldas D, Kokta BV. Interfacial adhesion of lignocellulosic materials in polymer composites: an overview. 1, 1993, Compos Interfaces, Vol. 1, pp. 87-108.
[10]	Marcovich NE, Reboredo MM, Aranguren MI Dependence of the mechanical properties of wood flour-polymer composites on the moisture content.1998, Appl Polym Sci., Vol. 68, pp. 2069-2076.
[11]	Beg M.D. H, Pickering K. L. Fiber pre-treatment and its effects on wood fiber reinforced polypropylene composites.3, 2006, Mater Manuf Processes, Vol. 21, pp. 303- 307.
[12]	M. N. Ichazo, C. Albano, J. Gonzalez, R. Perera, M.V. Candal Polypropylene/wood Flour Composites: Treatments and Properties. 2001, Composites Structure, Vol. 54, pp. 207-214.
[13]	Stark, NM. Wood fiber derived from scrap pallets used in polypropylene composites. 6, 1999, Forest Prod J, Vol. 49, pp. 39-46.
[14]	Kuruvilla J, Sabu T. Effect of chemical treatment on the tensile properties of short sisal fibre-reinforced polyethylene composites. 1996, Polymer, Vol. 23, pp. 5139- 5149.
[15]	Md. Rezaur Rahman, Md. Nazrul Islam, Md. Monimul Huque. Influence of fiber treatment on the mechanical and morphological properties of sawdust reinforced polypropylene composites.2010 Composites: part A, vol 39, pp.1739-1747.
[16]	American Standard Test Methods for Tensile Properties of Plastics, ASTM D 638-01. D638-01, ASTM. 01, 2002, In: Annual Book of ASTM Standard, Vol. 08, pp. 45-57.
[17]	American society of testing materials, standards test for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. (2000). ASTM D-790. 790, D. 2000.
[18]	Standard test method for Rockwell hardness of plastic and electrical insulating materials. ASTM D 785-98. 2002, Annual book of ASTM Standard, p. 08.01.
[19]	Ismail, H., Edyhan, M., and Wirjosentono, B. Bamboo fiber filled natural rubbercomposites; the effects of filler loading and bonding agent. J. of polym. Test, 2002, Vol. 21.pp. 139-144.
[20]	Brian, Smith. Infrared spectra of polymers: Polypropylene. Brian smith. Infrared spectral interpretation:A systematic approach. New York: CRC Press, 1999.
[21]	Lou C. W., Lin, C. W., Lei, C. H., Su, K. H., Hsu, C. H., Liu, Z. H., and Lin, J. H PET/PP blend with bamboo charcoal to produce functional composites. 2007, J.Mater. Process Tech., Vol. 192/193, pp. 428-433.
[22]	Joseph, S., Sreekala, M. S., Oommen, Z., Koshy, P., and Thomas, S. A. Comparison of mechanical properties of phenol formaldehyde composites reinforced with banana fibers and glass fiber. 2002, Comp. Sci. Tech, Vol. 62, pp. 1857-1868.
[23]	Lee, H.S., D. Cho, and S.O. Han. Effect of Natural Fiber Surface Treatments on the Interfacial and Mechanical Properties of Henequen/Polypropylene Biocomposites. 2008, Macromolecular Research, pp. vol.16 (5): p. 411- 417.
[24]	Rahman, M R. Huque M M. Islam, MN. Hasan M. Improvement of physico-mechanical properties of jute fiber reinforced polypropylene composites bu post-treatment. 2008, Composites: Part A, pp. 1739-1747.
[25]	Shane, B. Elvy, Gary R, Dennis, and Loo, Teck Ng Effects of Coupling Agent on the Physical Properties of Wood-Polymer Composites. 1995, Journal of Materials Processing Technology, Vol. 48, pp. 365-372.
[26]	Abdul Khalil, H. P. S., Issam, A. M., Ahmad Shakri, M. T., Suriani, R., and Awang, A.Y. Conventional agrocomposites from chemically modified fibres. 3, 2007, industrial crops and products, Vol. 26, pp. 315-323.
[27]	Myers, G. E. Wood Flour and Polypropylene or High Density Polyethylene Composites: Influence of Maleated Polypropylene Concentration and Extrusion Temperature on Properties. 1999, Intern. J. Polymeric Mater, Vol. 15, pp. 171-186.

For further details log on website :
http://www.scirp.org/journal/PaperInformation.aspx?PaperID=7842