In situ processing of cellulose nanocomposites

Published Date
April 2016, Vol.83:19–37, doi:10.1016/j.compositesa.2015.09.007
Special Issue on Biocomposites

Author 

• Dipa Ray ^a,,
• Sunanda Sain ^b

• aMechanical, Aeronautical and Biomedical Engineering Department, Irish Centre for Composites Research (ICOMP), Materials and Surface Science Institute, University of Limerick, Limerick, Ireland
• bDepartment of Polymer Science and Technology, University of Calcutta, India

Available online 3 October 2015.

Abstract

Nanocellulose has gained attention in recent times due to their light weight, high strength, stiffness, biodegradability and renewability. Natural fibres have been used as reinforcement in composites for past many years, but the use of nanocellulose as reinforcement in composites is relatively new. The main challenges of preparing nanocellulose based composites include (i) generation of nanocellulose from natural resources, (ii) production in larger scale, (iii) enhancing compatibility with hydrophobic polymers, and (iv) achieving uniform dispersion in polymer matrices. These challenges have encouraged researchers to innovate efficient processes and techniques to utilise the maximum benefit of such green nanoscopic materials. In situfabrication of cellulose nanocomposites is one such technique of achieving uniform nanocellulose dispersion in polymer matrices and obtaining a stronger filler/matrix interface. This review summarises the recent progress in the field of in situ processing of cellulose nanocomposites.

Keywords

A. Cellulose

A. Nanocomposites

B. Microstructures

D. Fractography

---

 Table 1

Table 1.

 Table 2

Table 2.

Fig. 1.

Fig. 2.

Fig. 3.

 Table 3

Table 3.

Fig. 4.

Fig. 5.

Fig. 6.

 Table 4

Table 4.

Fig. 7.

Fig. 8.

Fig. 9.

Fig. 10.

Fig. 11.

Fig. 12.

Fig. 13.

Fig. 14.

Fig. 15.

 Table 5

Table 5.

Fig. 16.

Fig. 17.

Fig. 18.

Fig. 19.

Fig. 20.

Fig. 21.

Fig. 22.

Fig. 23.

Fig. 24.

Fig. 25.

Fig. 26.

Fig. 27.

• ⁎ 
  Corresponding author. Tel.: +353 61 234164; fax: +353 61 213529.
  
  

For further details log on website :
http://www.sciencedirect.com/science/article/pii/S1359836816314226