Published Date
2014, Vol.9:23–33, doi:10.1016/j.proche.2014.05.004
International Conference and Workshop on Chemical Engineering UNPAR 2013 (ICCE UNPAR 2013)
Open Access, Creative Commons license
Author
Cellulose Nanofiber
Starch
Chitosan
Antimicrobial
For further details log on website :
http://www.sciencedirect.com/science/article/pii/S1876619614000199
2014, Vol.9:23–33, doi:10.1016/j.proche.2014.05.004
International Conference and Workshop on Chemical Engineering UNPAR 2013 (ICCE UNPAR 2013)
Open Access, Creative Commons license
Author
Available online 1 August 2014.
Abstract
Biopolymer active packaging is known to have low mechanical strength and highly brittle. Regardless to its disadvantage, polymers from natural sources have attracted serious attention since the non-renewable sources for example petroleum, the major precursor of plastic manufacturing become depleted. Starch-Chitosan for instance is a hybrid film that entirely green as it produced from a renewable material and totally degradable. The addition of chitosan in film packaging able to kill pathogen hence increases the food shelf life. Through nanotechnology advance, nanomaterial can be used for material reinforcement. Nowadays, greener approach could be applied by incorporating natural cellulose nanofiber into the film matrix. Oil palm empty fruit bunch (OPEFB) fiber that rich of cellulose contents could be treated chemically to purify the cellulose in the fiber. Cellulose fiber obtained was cut to a nano-size using acid hydrolysis. Transmission Electron Microscopy (T.E.M) obtained shown the nanofiber size was ranged between 1-100 nm in diameter. Nanocomposite film formulation, was constructed by varying the cellulose nanofiber incorporation between 2-10% per weight of starch. The strength of the films was measured as well as antimicrobial properties. The addition of 2% cellulose nanofiber into the film matrix exhibits high tensile strength with 5.25 Mpa compared to starch-chitosan hybrid film with 3.96 Mpa. However, no significant improvement in tensile strength was distinguished beyond that ratio. Antimicrobial analysis shows that the addition of cellulose nanofiber could increase the inhibition effect towards gram-positive bacteria but not towards gram-negative bacteria. The addition of 2% cellulose nanofiber increased the inhibition diameter towards gram positive bacteria, Bacillus subtilis up to 33%. However, inhibition towards Bacillus subtilis decreased with the incorporation of more cellulose nanofiber. In gram-negative bacteria Escherichia coli, the addition of cellulose nanofiber does not give significant effect to bacterial. In General, the addition of the unique structure of cellulose nanofiber in the starch based polymer system could enhance the mechanical strength of the film and increase the inhibition of the gram positive bacteria.
Keywords
Oil Palm Empty Fruit Bunch (OPEFB)
Abstract
Biopolymer active packaging is known to have low mechanical strength and highly brittle. Regardless to its disadvantage, polymers from natural sources have attracted serious attention since the non-renewable sources for example petroleum, the major precursor of plastic manufacturing become depleted. Starch-Chitosan for instance is a hybrid film that entirely green as it produced from a renewable material and totally degradable. The addition of chitosan in film packaging able to kill pathogen hence increases the food shelf life. Through nanotechnology advance, nanomaterial can be used for material reinforcement. Nowadays, greener approach could be applied by incorporating natural cellulose nanofiber into the film matrix. Oil palm empty fruit bunch (OPEFB) fiber that rich of cellulose contents could be treated chemically to purify the cellulose in the fiber. Cellulose fiber obtained was cut to a nano-size using acid hydrolysis. Transmission Electron Microscopy (T.E.M) obtained shown the nanofiber size was ranged between 1-100 nm in diameter. Nanocomposite film formulation, was constructed by varying the cellulose nanofiber incorporation between 2-10% per weight of starch. The strength of the films was measured as well as antimicrobial properties. The addition of 2% cellulose nanofiber into the film matrix exhibits high tensile strength with 5.25 Mpa compared to starch-chitosan hybrid film with 3.96 Mpa. However, no significant improvement in tensile strength was distinguished beyond that ratio. Antimicrobial analysis shows that the addition of cellulose nanofiber could increase the inhibition effect towards gram-positive bacteria but not towards gram-negative bacteria. The addition of 2% cellulose nanofiber increased the inhibition diameter towards gram positive bacteria, Bacillus subtilis up to 33%. However, inhibition towards Bacillus subtilis decreased with the incorporation of more cellulose nanofiber. In gram-negative bacteria Escherichia coli, the addition of cellulose nanofiber does not give significant effect to bacterial. In General, the addition of the unique structure of cellulose nanofiber in the starch based polymer system could enhance the mechanical strength of the film and increase the inhibition of the gram positive bacteria.
Keywords
References
- [1]
- H. P. S. Abdul Khalil, A.H. Bhat, and A. F. Ireana Yusra, ‘Green Composites from Sustainable Cellulose Nanofibrils: A Review’,. Carbohydrate Polymers, 87 (2012), 963-79.
- [2]
- H. P. S. Abdul Khalil, M.M. Marliana, A.M. Issam, and I. O. Bakare, ‘Exploring Isolated Lignin Material from Oil Palm Biomass Waste in Green Composites’, Materials & Design, 32 (2011), 2604-10.
- [3]
- Farah Fahma, Shinichiro Iwamoto, Naruhito Hori, Tadahisa Iwata, and Akio Takemura, ‘Isolation, Preparation, and Characterization of Nanofibers from Oil Palm Empty-Fruit-Bunch (Opefb)’, Cellulose, 17 (2010), 977-85.
- [4]
- Fazlena Hamzah, Ani Idris, and Tan Khai Shuan, ‘Preliminary Study on Enzymatic Hydrolysis of Treated Oil Palm (Elaeis) Empty Fruit Bunches Fibre (Efb) by Using Combination of Cellulase and B 1-4 Glucosidase’, Biomass and Bioenergy, 35 (2011), 1055-59.
- [5]
- M. John, and S. Thomas, ‘Biofibres and Biocomposites’, Carbohydrate Polymers, 71 (2008), 343-64.
- [6]
- Shaji Joseph, Sreekumar P.A, Jose M. Kenny, Debora Puglia, Sabu Thomas, and Kuruvilla Joseph, ‘Oil Palm Microcomposites: Processing and Mechanical Behavior’, Polymer Engineering & Science, 50 (2010), 1853-63.
- [7]
- Ruhul A. Khan Khan A., Stephane Salmieri, Canh Le Tien, Bernard Riedl, Jean Bouchard, Gregory Chauve, Victor Tan, Musa R. Kamal, Monique Lacroix, ‘Mechanical and Barrier Properties of Nanocrystalline Cellulose Reinforced Chitosan Based. Nanocomposite Films’, Carbohydrate Polymers, 90 (2012), 1601-08.
- [8]
- Narendiran Vitchuli Quan Shi, Joshua Nowak, Shan Jiang, Jane M. Caldwell, Frederick Breidt, Mohamed Bourham, Xiangwu Zhang, Marian McCord, ‘Multifunctional and Durable Nanofiber-Fabric-Layered Composite for Protective Application’, Journal of Applied Polymer Science (2012).
- [9]
- N. R. Savadekar, and S. T. Mhaske, ‘Synthesis of Nano Cellulose Fibers and Effect on Thermoplastics Starch Based Films’,. Carbohydrate Polymers, 89 (2012), 146-51.
- [10]
- Nattakan Soykeabkaew, Pitt Supaphol, and Ratana Rujiravanit, ‘Preparation and Characterization of Jute- and Flax-Reinforced Starch- Based Composite Foams’, Carbohydrate Polymers, 58 (2004), 53-63.
- [11]
- Nattakan. Soykeabkaew, Laosat, Nittaya., Ngaokla, Atitaya., Yodsuwan, Natthawut., Tunkasiri, Tawee, ‘Reinforcing Potential of Micro- and Nano-Sized Fibers in the Starch-Based Biocomposites’, Composites Science and Technology, 72 (2012), 845-52.
- [12]
- S. S. Suradi, R.M. Yunus, M.D. H. Beg, and Z. A. M. Yusof, ‘Influence Pre-Treatment on the Properties of Lignocellulose Based Composite’, in National Conference on Postgraduate Research (NCON-PGR) 2009 (UMP Conference Hall, Malaysia: Centre for Graduate Studies, Universiti Malaysia Pahang, 2009).
- [13]
- Xu Tao Wang, and Li Sha Liu, ‘Steam Explosion Pretreatment Technique and Application in Biomass Conversion’, Advanced Materials Research, 113-116 (2010), 525-28.
- [14]
- Sugiyama J. Yano H. , Nakagaito A.N., Nogi M., Matsuura T., Hikita M., Handa K., ‘Optically Transparent Composites Reinforced with Networks of Bacterial Nanofibers’, Advanced Material, 17 (2005), 153.
- ☆Peer-review under responsibility of the Organizing Committee of ICCE UNPAR 2013.
- ⁎ Corresponding author. Tel.: +06-07-5535543; fax: +06-07-5536163.
http://www.sciencedirect.com/science/article/pii/S1876619614000199
I am very ecstatic when I am reading this blog post because it is written in a good manner and the writing topic for the blog is excellent.
ReplyDeleteThanks for sharing valuable information. Also get to know about Flexible Packaging Films