Automatic segmentation of acoustic tomography images for the measurement of wood decay

Published Date
Original

First Online: 

23 November 2016

DOI: 10.1007/s00226-016-0878-1

Cite this article as: 

Espinosa, L., Arciniegas, A., Cortes, Y. et al. Wood Sci Technol (2016). doi:10.1007/s00226-016-0878-1

Author

• Luis EspinosaEmail author
• Andrés Arciniegas
• Yolima Cortes
• Flavio Prieto
• Loïc Brancheriau

Abstract

In the assessment of standing trees, an acoustic tomographic device is a valuable tool as it permits to acquire data from the inner part of the trees without causing them to fall down unnecessarily. The interpretation of the images produced by these devices is part of the diagnosis process for urban trees management. This paper presents a segmentation methodology to identify defective regions in cross-section tomographic images obtained with an Arbotom® device. Two trunk samples obtained from a Blackwood Acacia tree (Acacia melanoxylon) were tested, simulating defects by drilling holes with known geometry, size and position and using different numbers of sensors. Tomograms from the trunk cross sections were processed to align the propagation velocity data with the corresponding region, either healthy or defective. The segmentation methodology proposed aims to find a velocity threshold value to separate the defective region adjusting a logistic regression model to obtain the value that maximizes a performance criterion, using in this case the geometric mean. Two criteria were used to validate this methodology: the geometric mean and the surface ratio detected. Although an optimal threshold value was found for each experiment, this value was strongly influenced by the defect characteristics and the number of sensors. The correctly segmented area ranging from 54 to 93% demonstrates that the threshold method is not always the most proper way to process this type of images, and thereby further research is required in image processing and analysis.

References 

1. Arciniegas A, Prieto F, Brancheriau L, Lasaygues P (2014) Literature review of acoustic and ultrasonic tomography in standing trees. Trees 28(6):1559–1567CrossRefGoogle Scholar
2. Deflorio G, Fink S, Schwarze FW (2008) Detection of incipient decay in tree stems with sonic tomography after wounding and fungal inoculation. Wood Sci Technol 42(2):117–132CrossRefGoogle Scholar
3. Dikrallah A, Kabouchi B, Hakam A, Brancheriau L, Bailleres H, Famiri A, Ziani M (2010) Study of acoustic wave propagation through the cross section of green wood. Comptes Rendus Mécanique 338(2):107–112CrossRefGoogle Scholar
4. Divos F (2005) Resolution of stress wave based acoustic tomography. In: Proceedings of the 14th international symposium on nondestructive testing of wood. Hannover, Germany, pp 309–314
5. Dobson A (2001) An introduction to generalized linear models, 2nd edn. Taylor & Francis, Oxfordshire (Chapman & Hall/CRC Texts in Statistical Science)CrossRefGoogle Scholar
6. Gao S, Wang N, Wang L, Han J (2014) Application of an ultrasonic wave propagation field in the quantitative identification of cavity defect of log disc. Comput Electron Agric 108:123–129CrossRefGoogle Scholar
7. Gilbert EA, Smiley ET (2004) Picus sonic tomography for the quantification of decay in white oak (Quercus alba) and hickory (Carya spp.). J Arboric 30(5):277–281Google Scholar
8. Igartúa DV, Monteoliva S, Piter JC (2009) Estudio de algunas propiedades físicas de la madera de Acacia melanoxylon r. br. en Argentina (Study of some physical properties of Argentinean Acacia melanoxylon R. Br. Maderas). Cienc Tecnol 11(1):3–18 (in Spanish)Google Scholar
9. Johnstone D, Tausz M, Moore G, Nicolas M (2010) Quantifying wood decay in Sydney bluegum (Eucalyptus saligna) trees. Arboric Urban For 36:243–252Google Scholar
10. Kubat M, Matwin S, (1997) Addressing the curse of imbalanced training sets: one-sided selection. In: Proceedings of the fourteenth international conference on machine learning. Nashville, Morgan Kaufmann, pp 179–186
11. Li L, Wang X, Wang L, Allison RB (2012) Acoustic tomography in relation to 2D ultrasonic velocity and hardness mappings. Wood Sci Technol 46(1–3):551–561CrossRefGoogle Scholar
12. Li G, Wang X, Feng H, Wiedenbeck J, Ross RJ (2014) Analysis of wave velocity patterns in black cherry trees and its effect on internal decay detection. Comput Electron Agric 104:32–39CrossRefGoogle Scholar
13. Liang S, Fu F (2012) Relationship analysis between tomograms and hardness maps in determining internal defects in Euphrates poplar. Wood Research 57(2):221–230Google Scholar
14. Maurer HR, Schubert SI, Baechle F, Clauss S, Gsell D, Dual J, Niemz P (2006) A simple anisotropy correction procedure for acoustic wood tomography. Holzforschung 60:567–573CrossRefGoogle Scholar
15. Nicolotti G, Socco L, Martinis R, Godio A, Sambuelli L (2003) Application and comparison of three tomographic techniques for detection of decay in trees. J Arboric 29(2):66–78Google Scholar
16. Pal N, Pal S (1993) A review on image segmentation techniques. Pattern Recognit 26(9):1277–1294CrossRefGoogle Scholar
17. Pereira-Rollo LC, da Silva Filho DF, Tomazello Filho M, de Oliveira Moraes S, do Couto HTZ (2014) Can the impulse propagation speed from cross-section tomography explain the conditioned density of wood? Wood Sci Technol 48(4):1–13CrossRefGoogle Scholar
18. Pokorny J (2003) Urban tree risk management: a community guide to program design and implementation. USDA Forest Service, St. Paul, MNGoogle Scholar
19. Rabe C, Ferner D, Fink S, Schwarze F (2004) Detection of decay in trees with stress waves and interpretation of acoustic tomograms. Arboric J 28(1–2):3–19CrossRefGoogle Scholar
20. Rinntech (2013) ARBOTOM—3-D impulse tomograph: non-destructive inspection of the inner conditions of trees. Rinntech, HeidelbergGoogle Scholar
21. Schubert S (2007) Acousto-ultrasound assessment of inner wood decay in standing trees: possibilities and limitations. PhD thesis, ETH, Zurich
22. Tovar Corzo G (2006) Manejo del arbolado urbano en Bogotá. Colomb For 9(19):187–205Google Scholar
23. Wang X, Allison RB, Wang L, Ross RJ (2007a) Acoustic tomography for decay detection in red oak trees. Research paper FPL-RP-642, US Department of Agriculture, Forest service, Forest Products Laboratory, Madison, WI
24. Wang L, Xu H, Zhou C, Li L, Yang X (2007b) Effect of sensor quantity on measurement accuracy of log inner defects by using stress wave. J For Res 18(3):221–225CrossRefGoogle Scholar

For further details log on website :
http://link.springer.com/article/10.1007/s00226-016-0878-1