Physical and mechanical properties of bio-composites from wood particles and liquefied wood resin

Author: Pan, Hui; Shupe, Todd F.; Hse, Chung-Yun; 

Date: 2009

Source: Book portion In: J. R. Shelly; M. E. Puettmann; K. E. Skog; H. -S. Han. eds. Woody Biomass Utilization: Challenges and Opportunities. Madison, WI: Forest Products Society: 43-46.

Publication Series: Book

Description: Compression molded composites were made from wood particles and a liquefied wood/phenol/formaldehyde co-condensed resin. Based on our previous research, a phenol to wood (P/W) ratio of 2/1 was chosen for this study. The two experimental variables selected were: 1) liquefaction temperature (150o and 180oC) and 2) cooking method (atmospheric and sealed). Panels were tested in static bending for modulus of rupture (MOR) and modulus of elasticity (MOE). Dimensional stability properties were also measured by 24-hour soaking and 2-hour boiling test. On average, the composite from the atmospheric cooked liquefied wood yielded higher MOR and MOE than that from the sealed cooked liquefied wood at 150oC. But, the results were the opposite at the 180oC temperature. Composites from atmospheric cook liquefied wood gave better dimensional stabilities than those from the sealed cooking both in 24-hour soaking and 2-hour boiling tests.

Publication Notes:

• We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
• This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
• You may send email to pubrequest@fs.fed.us to request a hard copy of this publication. (Please specify exactly which publication you are requesting and your mailing address.)

XML: View XML

Citation:

---

Pan, Hui; Shupe, Todd F.; Hse, Chung-Yun. 2009. Physical and mechanical properties of bio-composites from wood particles and liquefied wood resin. In: J. R. Shelly; M. E. Puettmann; K. E. Skog; H. -S. Han. eds. Woody Biomass Utilization: Challenges and Opportunities. Madison, WI: Forest Products Society: 43-46.

For further details log on website :
http://www.treesearch.fs.fed.us/pubs/33915