Surface wettability, surface free energy, and surface adhesion of microwave plasma-treated Pinus yunnanensis wood

USDA
United States Of Department Agriculture

National Agricultural Library

Title 
Surface wettability, surface free energy, and surface adhesion of microwave plasma-treated Pinus yunnanensis wood

Author 
Qun Fang , Hui-Wang Cui , Guan-Ben Du

Wood science and technology 2016 v.50 no.2 pp. 285-296

Abstract

In this study, microwave plasma was used to treat the surface of Pinus yunnanensis wood under the conditions of 220 V of input voltage, 20 μA of filament current, 8.8 mW of output power, 11 mW of reflected power, 2450 MHz of frequency, and 700 Pa of vacuum. The microwave plasma presented very significant treatment effects on the treated surface, even under weak treatment conditions, for example long treatment distance of 120 mm and short treatment time of 60 s. The treated surface showed better surface wettability, and the contact angles on the treated surface measured from deionized water, glycerin, and diiodomethane decreased sharply, even decreased to 0°. The treated surface also presented higher surface free energy, for example, 61.4–62.8 mJ m⁻², being greatly improved by microwave plasma compared to that of untreated surface of 46.5 mJ m⁻². The bond strength of the treated surface was 7.34 MPa, about 16 % higher than 6.31 MPa for untreated surface. The best treatment effect was obtained for the treatment distance of 120 mm and treatment time of 60–300 s. This technique might be widely used in wood modification and wood processing.

For further details log on website :

http://pubag.nal.usda.gov/pubag/article.xhtml?id=4859487&searchText=Wood&searchField=allfields