Characterization and productivity of cassava waste and its use as an energy source

Author

João Paulo SotoVeigaa1Teresa LosadaVallebJosé CarlosFeltranbWaldir AntonioBizzoa

a

Faculty of Mechanical Engineering, University of Campinas – UNICAMP, 13083-970 Campinas, SP, Brazil

b

Agronomic Institute of Campinas – IAC, 13012-970 Campinas, SP, Brazil

Received 15 May 2015, Revised 25 February 2016, Accepted 27 February 2016, Available online 19 March 2016.

Highlights

•

Cassava waste shows a yield from 4.1 to 9.2 t ha−1 yr−1 (dry basis).

•

Moisture content was about 60% for root and 52%–75% for field waste.

•

Ash content on cassava waste varied from 2.5% to 3.5%.

•

60% of the ash consisted of alkali oxides which favour occurrence of incrustation.

•

Cassava waste has potential for use as an energy source.

Abstract

This study sought to quantify and characterize cassava waste as fuel. The wastes from three cultivars were collected to study and were divided into three distinct parts of the cassava plant: seed stem, thick stalks, and thin stalks. Physical and chemical analyzes were carried out to determine the elemental composition of the waste: volatile matter; fixed carbon; ash; moisture; lignin; cellulose; hemicellulose; ash composition and higher heating value were determined. We conducted a thermogravimetric analysis in oxidizing and inert atmospheres to study the behavior of the waste as fuel. The root productivity obtained ranged from 7.7 to 13.0 t ha−1 yr−1 on a dry basis (db), and the ratio between waste and roots varied from 0.36 to 0.91. The physical and chemical properties of cassava waste are analogous to those of woody biomass regarding the elemental composition, the higher heating value, and thermogravimetric analysis. Ash content varied from 2.5% to 3.5%, reaching around 6.0% in samples unwashed. Approximately 60% of the ashes are alkali oxides, especially P2O5, K2O, and CaO, which have low melting points. The alkali index calculated suggests that there is a strong tendency that the combustion process leads to ash fouling and the formation of ash deposits.

For further details logon website:
http://www.sciencedirect.com/science/article/pii/S0960148116301793