Blog List

Sunday 29 May 2016

Wood Filler-recycled Polypropylene (WF-RPP) Composite Pallet: Study of Fastening Method

Time
Wood Filler-recycled Polypropylene (WF-RPP) Composite Pallet: Study of Fastening Method

Author
T.S. Khoo
School of Mechanical Engineering, Engineering Campus, Universiti Sains Malaysia 14300 Nibong Tebal, Penang, Malaysia

M.M. Ratnam
School of Mechanical Engineering, Engineering Campus, Universiti Sains Malaysia 14300 Nibong Tebal, Penang, Malaysia, mmaran@eng.usm.my

S.A.B. Shahnaz
School of Industrial Technology, Universiti Sains Malaysia, 11800 Penang, Malaysia

H.P.S. Abdul Khalil
School of Industrial Technology, Universiti Sains Malaysia, 11800 Penang, Malaysia

Abstract

Materials handling pallets were developed using wood filler-recycled polypropylene (WF-RPP) composite in our previous work. An important stage in the development of the full-size pallet is the assembly of the various components that make up the pallet. The objective of this work is to find a suitable fastening method, fastener type, and size to assemble the stringer-class pallet made from the composite. The following investigations were carried out: (i) comparative study on the ease of fastening screws with and without pre-drilling, (ii) determination of minimum depth to which pilot holes need to be drilled to enable screws of various sizes (#3 to #10) to penetrate into the composite, (iii) comparison on the ease of fastening the components using different screw types, (iv) determination of the minimum distance between screws and minimum distance of screw from the edge required to assemble the components without cracking, and (v) comparative study on the ease of fastening of composites having different filler loading. The results of the study showed that it is not possible to use wood screws or tapping screws to fasten the various parts of the pallet without pre-drilling. A pilot hole of diameter 2.5 mm and depth more than 6.0 mm was found to be suitable for screws with nominal sizes ranging from gauge #3 (2.515mm) to gauge #8 (4.166mm) to penetrate into the composite without difficulty.



For further details log on website :

http://jrp.sagepub.com/content/27/16-17/1723.abstract

No comments:

Post a Comment

Advantages and Disadvantages of Fasting for Runners

Author BY   ANDREA CESPEDES  Food is fuel, especially for serious runners who need a lot of energy. It may seem counterintuiti...