Characterization of Biochar Derived from Rubber Wood Sawdust through Slow Pyrolysis on Surface Porosities and Functional Groups

Published Date

2013, Vol.68:365–371, doi:10.1016/j.proeng.2013.12.193

INTERNATIONAL TRIBOLOGY CONFERENCE MALAYSIA 2013

Open Access, Creative Commons license

Title 

Characterization of Biochar Derived from Rubber Wood Sawdust through Slow Pyrolysis on Surface Porosities and Functional Groups ☆

• Author 

• A. Shaaban ^a
• Sian-Meng Se ^a,
• Nona Merry M. Mitan ^b
• M.F. Dimin ^a

• aDepartment of Engineering Materials, Faculty of Manufacturing Engineering, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
• bDepartment of Plant and Maintenance, Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia

Available online 12 April 2014.

Abstract

Biochars were prepared by conducting slow pyrolysis of rubber wood sawdust (RWSD) derived from sawn timber. Eventhough researches on preparation of biochar from biomass have been reported by many researchers, limited work has been reported for investigation of biochar RWSD for its surface porosities and functional groups. Surface porosity of biochars provides a suitable dimension for cluster of microorganism to grow and higher porosity for better water holding capacity. Surface functional groups contain oxygen may help to improve the soil fertility by increasing the cation and anion exchange capacities to reduce the nutrient leaching in soil. The pyrolysis process was carried out at temperatures ranging between 300 °C to 700 °C at the heating rate of 5 °C/min for 3 hours with continuous nitrogen purging. The influence of pyrolysis temperatures on the biochars pores were investigated by using X-Ray Diffraction (XRD), Brunauer-Emmett-Teller (BET) surface analysis and Scanning Electron Microscopy (SEM). The surface functional groups were examined by Fourier Transform Infrared (FT-IR). SEM analysis clearly showed the development of well-defined pores distributed on biochars surface. It was found that the maximum BET surface area and total pore volume were 5.493 m2/g and 0.0097 cm3/g respectively for biochar pyrolysis at 700 °C. The FT-IR spectrum analysis showed the functional groups decreased with the increasing of pyrolysis temperature. The results highlighted the effect of pyrolysis temperature on biochar pores accumulative that associated with soil fertility and nutrient retention in soil which could be beneficial to the agricultural industries.

Keywords

• Biochar
• slow pyrolysis
• BET surface area
• surface porosity
• surface functional groups

---

References

1. • [1]
   • Conversion of cellulose, hemicellulose and lignin into platform molecules biotechnological approach: Technical Presentation, EuroBioRef Summer School Italy, 18-24 Sept. 2011.
2. • [2]
   • B.H. Hameed, A.L. Ahamd, K.N.A. Latiff
   • Adsorption of basic dye (methyl blue) onto activated carbon prepared form rattan sawdust
   • Dyes and Pigments, Volume 75, 2007, p. 143
   • Article
      | 
      PDF (247 K)
      | 
     View Record in Scopus
     Citing articles (301)
3. • [3]
   • W.T. Tsai, M.K. Lee, Y.M. Chang
   • Fast pyrolysis of rice husk: Product yields and compositions
   • Bioresource Technology, Volume 98, Issue 1, 2007, p. 22
   • Article
      | 
      PDF (282 K)
      | 
     View Record in Scopus
     Citing articles (189)
4. • [4]
   • Biochar: implication for agricultural productivity: Technical Report for 2011, Australian Government, 2011.
5. • [5]
   • E.S. Krull, J.A. Baldock, J.D. Skjemstad, R.J. Smernik
   • Characteristic of biochar: organo-chemical properties, Biochar for environment science and technology
   • Earthsan Publication Ltd, UK, 2009, p. 53
   • View Record in Scopus
     Citing articles (18)
6. • [6]
   • A. Downie, A. Crosky, P. Munroe
   • Physical properties of biochar, Biochar for environment managemen science and technology, Earthscan
   • London UK, 2009, p. 13
   • View Record in Scopus
     Citing articles (1)
7. • [7]
   • J. Lehmann, S. Jospeh
   • Biochar for environment management science and technology
   • Earthscan, London, UK, 2009, p. 3
   • View Record in Scopus
     Citing articles (1)
8. • [8]
   • F. Rouquerol, I. Rouquerol, K. Sing
   • Adsorption by powders and porous solids
   • 1999, Academic Press, London, UK, p. 13
9. • [9]
   • J.E. Theis, M.C. Rillig
   • Characteristics of biochar, Biological properties, Biochar for environment management Science and technology
   • Earthscan, London, UK, 2009, p. 85
   • View Record in Scopus
     Citing articles (1)
10. • [10]
    • K.Y. Chan, Z. Xu
    • Biochar nutrient properties and their enhancement, Biochar for environment management Science and technology
    • Earthscan, London, UK, 2009, p. 68
11. • [11]
    • S.M. Se, A. Shaaban, I.M. Ibrahim
    • Microwave absorbing material using rubber wood sawdust
    • IEEE Symposium on Wireless Telecommunication and Application, 2011, p. 127
    • View Record in Scopus
      Citing articles (1)
12. • [12]
    • C. Srinisvasakanan, M.Z.A. Bakar
    • Production of activated carbon from rubber wood sawdust
    • Biomass and Bioenergy, Volume 27, 2004, p. 89
13. • [13]
    • P. Chaisarn, T. Satapanajaru, J. Mahujchariyawong
    • Adsorption of VOCs by activated charcoal produced from saw dust in para- rubber wood furniture manufacturing
    • Thammasat International Journal Science and Technology, Volume 13, 2008, p. 8
    • View Record in Scopus
      Citing articles (4)
14. • [14]
    • H.I. Boerhendy, D.S. Agustina, H. Suryaningtyas
    • Basic characteristics of rubber wood for some recommended clones in Indonesia
    • Sembawa Research Centre Indonesia Rubber Research Institute, 2010
15. • [15]
    • Wood characteristics, maintaining and coating properties of rubber wood plantation in China: Workshop on Research Institute of Wood Industry, Dec. 2008.
16. • [16]
    • Z. Wang, J. Coa, J. Wang
    • Pyrolitic characteristics of pine wood in a slowly heating and gas sweeping fixed-bed ractor
    • Journal of Analytical and Applied Pyrolysis, Volume 84, 2009, p. 179
    • Article
       | 
       PDF (259 K)
       | 
      View Record in Scopus
      Citing articles (61)
17. • [17]
    • J.M. Novak, I. Lima, B. Xing, J.W. Gaskin, C. Steiner, K.C. Das, M. Ahmedna, D. Rehrah, D.W. Watts, W.J. Bussher, H. Schomberg
    • Characterization of design biochar produced at different temperatures and their effects on loamy sand
    • Environmental Science, Volume 3, 2009, pp. 195–206
    • View Record in Scopus
      Citing articles (217)
18. • [18]
    • A.L. Ahmad, M.M. Loh, J.A. Aziz
    • Preparation and characterization of activated carbon from oil palm wood and its evaluation on Methylene blue adsorption
    • Journal of Dyes and Pgiments, Volume 75, 2007, p. 263
    • Article
       | 
       PDF (778 K)
       | 
      View Record in Scopus
      Citing articles (88)

• ☆
  Selection and peer-review under responsibility of The Malaysian Tribology Society (MYTRIBOS), Department of Mechanical Engineering, Universiti Malaya, 50603 Kuala Lumpur, Malaysia.

• ⁎ 
  Corresponding author.

For further details log on website :
http://www.sciencedirect.com/science/article/pii/S187770581302047X