UTILIZATION OF MICRO SISAL FIBERS AS REINFORCEMENT AGENT AND POLYPROPYLENE OR POLYLACTIC ACID AS POLYMER MATRICES IN BIOCOMPOSITES MANUFACTURE

Author

Subyakto Subyakto, Nanang Masruchin, Kurnia Wiji Prasetiyo, Ismadi Ismadi

Abstract

Sisal (Agave sisalana) as a perennial tropical plant grows abundantly in Indonesia. Its fibers can be used as the reinforcement agent of biocomposite products. Utilization of sisal as natural fiber has some notable benefits compared to synthetic fibers, such as renewable, light in weight, and low in cost. Manufacture of biocomposite requires the use of matrix such as thermoplastic polymer, e.g. polypropylene (PP) and polylactic acid (PLA) to bond together with the reinforcement agent (e.g. sisal fibers). In relevant, experiment was conducted on biocomposites manufacture that comprised sisal fibers and PP as well as PLA. Sisal fibers were converted into pulp, then refined to micro-size fibrillated fibers such that their diameter reduced to about 10 μm, and dried in an oven. The dry microfibrillated sisal pulp fibers cellulose (MSFC) were thoroughly mixed with either PP or PLA with varying ratios of MSFC/PP as well as MSFC/PLA, and then shaped into the mat (i.e. MSFC-PP and MSFC-PLA biocomposites). Two kinds of shaping was employed, i.e. hot-press molding and injection molding. In the hot-press molding, the ratio of  MSFC/PP as well as MSFC/PLA ranged about 30/70-50/50. Meanwhile in the injection (employed only on assembling the MSFC-PLA biocomposite), the ratio of MSFC/PLA varied about 10/90-30/70. The resulting shaped MSFC-PP and MSFC-PLA biocomposites were then tested of its physical and mechanical properties. With the hot-press molding device, the physical and mechanical (strength) properties of MSFC-PLA biocomposite were higher than those of  MSFC-PP biocomposite. The optimum ratio of  MSFC/PP as well as MSFC/PLA reached concurrently at 40/60. The strengths of MSFC-PP as well as MSFC-PLA biocomposites were greater than those of individual polymer (PP and PLA). With the injection molding device, only the MSFC-PLA  biocomposite  was formed  and its strengths  reached  maximum  at 30/70  ratio.  The particular strengths (MOR and MOE) of MSFC-PLA biocomposite shaped with injection molding were lower than those with hot-press molding, both at 30/70 ratio. The overall MOR of such MSFC- PLA biocomposite was lower than that of pure PLA, while its MOE was still mostly higher.

Keywords

Biocomposites; sisal; micro-size fibers; polypropylene; polylactic acid; physical mechanical properties

Full Text:

PDF

References

Arzondo, L.M., A. Vazquez, J.M. Carella, and J.M. Pastor, 2004. A low-cost, low-fiber- breakage, injection molding process for long sisal fiber reinforced polypropylene. Polymer Engineering and Science 44: 1766-1772.

Berglund, L.A. 2004. Cellulose based nanocomposites. In: Natural fibers,biopolymers and their biocomposites (Ed.: Mohanty). CRC Press LCC.

Bledzki, A.K., O. Faruk, V.E and Sperber. 2006.Cars from bio-fibres. Macromol. Mater. Eng. 291: 449.

Bogoeva-Gaceva, G., M. Avella, M. Malinconico, A. Buzarovska, A. Grozdanov, G. Gentile, M.E. Errico. 2007. Natural fiber eco- composites. Polymer Composites-2007. DOI 10.1002/pc.

Iwamoto, S., N.A. Nakagaito, H. Yano and M. Nogi.

Optically transparent composites reinforced with plant fiber-based nano- fibers. Applied Physics A 81: 1109-1112.

John, M.J. and S. Thomas. 2008. Biofibres and biocomposites. Carbohydrate Polymer 71: 343-364.

Joseph, P.V., K. Joseph and S. Thomas. 1999. Effect of processing variables on the mechanical properties of sisal-fiber-reinforced polypropylene composites. Composites Science and Technology 99: 1625-1640.

Li, Y., Y.W. Mai and L. Ye. 2000. Sisal fibre and its composites: a review of recent developments.Composite Science and Technology 60:2037-2055.

Mathew A.P, K. Oksman and M. Sain. 2005. Mechanical properties of biodegradable composite from poly lactic acid (PLA) and microcrystalline cellulose (MCC). J Applied Polymer Science. 97: 2014-2025.

Mohanty, A.K., M. Misra, and L.T. Drzal. 2002. Sustainable bio-composites from renewable resources: Opportunities and challenges in the green materials world. J. Polymers and the Environment, 10 (½): 19-26.

Mohanty, S., S.K. Verma, S.K. Nayak and S.S. Tripathy. 2004a. Influence of fiber treatment on the performance of sisal polypropylene composites. Journal of Applied Polymer Science 94:1336-1345.

Mohanty, S., S.K. Nayak, S.K. Verma, S.S. Tripathy. 2004b. Effect of MAPP as coupling agent on the performance of sisal- PP composites. Journal of Reinforced Plastics and Composites 23: 2047-2063.

Munawar, S.S. 2008. Properties of non-wood plant fiber bundles and the development of their composites. Dissertation, Department of Forestry and Biomaterials Science, Kyoto University, Japan, March 2008.

Nakagaito, A. N. and H. Yano. 2004. The effect of morphological changes from pulp fiber towards nano-scale fibrillated. Applied Physics A 78: 547-552.

Nakagaito, A. N. and H. Yano. 2005. Novel high strength biocomposites based on microfibrillated cellulose having nanoorder-unit web-like network structure. Applied Physics A 80: 155-159.

Netravali, A.N. and S. Chabba. 2003. Composites get greener. Materials Today, April 2003, Elsevier Science Ltd. pp. 22-28.

Oksman, K., M. Skrifvars and J.F. Selin. 2003. Natural fibers as reinforcement in polylactic acid (PLA) composites. Composites Science and Technology 63: 1317-1324.

Suryanegara, L., A.N. Nakagaito, H. Yano. 2009. The effect of crystallization of PLA on the thermal and mechanical properties of microfibrillated cellulose reinforced PLA composites. Composites Science and Technology 69: 1187-1192.

Wambua, P., J. Ivens, and I. Verpoest. 2003. Natural fibres: can they replace glass in fibre reinforced plastics?. Composites Science and Technology 63: 1259-1264.

Zimmermann, T., E. Pohler and T. Geiger. 2004. Cellulose fibrils for polymer reinforcement. Advanced Engineering Materials 6 (9): 754-761.

DOI: http://dx.doi.org/10.20886/ijfr.2013.10.1.11-20

For further details log on website :
http://ejournal.forda-mof.org/ejournal-litbang/index.php/IJFR/article/view/15