Productivity of harvesting dense birch stands for bioenergy

Published Date
Biomass and Bioenergy
May 2016, Vol.88:142–151, doi:10.1016/j.biombioe.2016.03.016
Research paper

• Author 

• Paula Jylhä ^a,,
• Dan Bergström ^b,

• aNatural Resources Institute Finland, Green Technology, Silmäjärventie 2, FI69100, Kannus, Finland
• bSwedish University of Agricultural Sciences, Department of Forest Biomaterials and Technology, Skogsmarksgränd, SE-901 83 Umeå, Sweden

Received 23 November 2015. Revised 24 February 2016. Accepted 14 March 2016. Available online 24 March 2016. 

Highlights

• •
  Energy biomass can be harvested cost-efficiently from downy birch thickets by clear-cuts.
• •
  The Bracke C16.b felling head reached a productivity of 3–11 dry tons per effective hour.
• •
  The productivity of forwarding at a distance of 300 m was 7–10 dry tons per effective hour.

Abstract

Marginal lands could be utilized for increasing energy biomass production independent of industrial roundwood procurement. Dedicated energy biomass production systems on such sites would be based on low stand establishment cost, clear-cutting at an early stage, and coppice regeneration. Harvesters designed for the processing of industrial roundwood are inefficient or too costly to use in small-diameter and dense stands, while insufficient cutting capacity and uneven space distribution of trees limit the use of modified agricultural harvesters developed for short-rotation woody-crop plantations (e.g. willow). We constructed time consumption models for clear-cutting and forwarding of whole trees from un-thinned, small-diameter stands. The data originated from naturally afforested downy birch-dominated stands located in a cutaway peat production area in northern Finland. Stand age varied from 14 to 29 years and stand density was 5150–160,250 trees per hectare. In clear-cutting, a medium-sized forest harvester equipped with an accumulating felling head fitted with a circular saw disc was used, and subsequent forwarding was done using a modified medium-sized forwarder. Cutting productivity was 3–11oven-dry tons (ODt) per effective hour (E₀-h), and was highly dependent on stand characteristics (e.g. mean whole-tree volume). At a distance of 300 m, for example, the productivity of forwarding in the time study plots was 6.7–10.4 ODt E₀-h⁻¹. Our study indicates that energy biomass can be harvested from young downy birch thickets efficiently by clear-cutting with appropriate machinery.

Keywords

SRC

Bioenergy

Fuel wood

Coppice

Clear-cutting

Downy birch

---

 Table 1

Table 1.

Fig. 1.

 Table 2

Table 2.

 Table 3

Table 3.

 Table 4

Table 4.

Fig. 2.

Fig. 3.

 Table 5

Table 5.

Fig. 4.

 Table 6

Table 6.

Fig. 5.

 Table 7

Table 7.

 Table 8

Table 8.

Fig. 6.

Fig. 7.

• ∗ 
  Corresponding author.

Copyright © 2016 Published by Elsevier Ltd.

For further details log on website :
http://www.sciencedirect.com/science/article/pii/S0961953416300654