UTILIZAÇÃO DA MADEIRA DE CANAFÍSTULA {Peltophorum dubium (Spreng.) Taub.) NA ONFECÇÃO DE CHAPAS DE MADEIRA AGLOMERADAS

AUTHOR(S)

Modes, Karina Soares; Vivian, Magnos Alan; Lilge, Daniela Silva; de Melo, Rafael Rodolfo; Santini, Elio José; Haselein, Clovis Roberto

PUB. DATE

March 2012

SOURCE

Ciência Florestal (01039954);2012, Vol. 22 Issue 1, p147

SOURCE TYPE

Academic Journal 

DOC. TYPE

Article 

ABSTRACT

This study was carried out to evaluate the potential of use of canafistula wood (Peltophorum dub ium (Spreng.) Taub.) in manufacturing particleboard, bonded with tannin and urea-formaldehyde adhesives used in a ratio of 9% of the particles oven-dry weight. For each treatment, three boards were made with a nominal density of 0.63 g/cm3. The properties evaluated were the water absorption for two and 24 hours of immersion and the thickness swelling, the static bending (MOE and MOR), the screw withdrawal (RAP) and the internal bonding (LI), according to procedures prescribed by ASTM D-1037 (2000). The results were compared with standards established by ANSI A208.l (1987) and DIN 68761 (1971). The urea-formaldehyde adhesive increased the water absorption of boards and the data results of thickness swelling tests were in accordance with the standards for both treatments. With the exception of the MOR, the resistance data results from the urea bonded boards were below of the minimum standard values; for tannin, all the properties were superior, with the exception of the RAP. According to the results of this study, canafistula wood, when combined with tannin-formaldehyde adhesive, can be an alternative source of raw material for particleboard production.

ACCESSION #

87020538

For further details log on website :
http://connection.ebscohost.com/c/articles/87020538/utiliza-o-da-madeira-de-canaf-stula-peltophorum-dubium-spreng-taub-na-onfec-o-de-chapas-de-madeira-aglomeradas